Search results

I'm finally making some progress. These Vishay resistors are significantly larger than typical resistors. It makes for a tight squeeze in some spots Im still waiting for an order from taydas and I may need to place another mouser order to get some parts I missed but I'm exited to get this done

I'm going to stick in a 10uF in for C8 and see what happens. It was the next biggest value that Tayda had wima caps for. I know I want the HPF to be lower (based on my experience with the HX stomp emulation) but I don't have a specific target frequency in mind. Ill try to take measurements of...

Whenever I do stripboard builds I always build two. The second copy has the same problem so I can rule out bad components/bad solder joints. I wired up the second one using a bunch of alligator clips just to check. Obviously it's going to be worse and noisier than the actually wired up copy...

Ive proper the circuit and the fizz is occuring somewhere in the third stage. The gate of transistor three sounds fine

I just finished a Benson stripboard build, but I have this weird fizz under the sound that I can't figure out. I have swapped all of the transistors out and have tried different bias voltage for each tranistir but the fizz is still there. Any ideas what is causing this and how I can fix it?

I have all premium expensive parts in my cart and I'm coming in at like $300. I don't know exactly how much because I have like 10 projects lumped together

I was approached and asked for a Mosrite FuzzRite clone by two people and I'm happy with how they turned out. This was my first time using taydas printing service. It was pretty easy to make a simple clean design. One of the enclosures got scratched up and I forgot my LED resistors initially...

Looks great! Where did you get the enclosure from?

Good call, I didn't even check what tubes the crack uses. I guess I'll look into something 12au7 based

A tube headphone amp is on my list for this year. I plan to get a pair of HD600s soon and I've heard they paper well with tubes. I'm thinking a bottlehead crack using one of vigilante398s power supply boards. It would make it completely transformerless, affordable, and pretty small. It'll...

Phaser is great on banjo. Check out Shadowgrass live shows for some great examples

I found a pair of 8056 Nuvistors in a old parts bin. Is there anything cool I can build with these?

A headphone amp using a sushi hv board has been on my to list for a while. Those look great!

Here's my best crack at it but I haven't made a template before https://drill.taydakits.com/box-designs/new?public_key=OUVzYXc2cHBEWml1NWFXdDNOV0h6QT09Cg==

Looking for a lambchop template. I couldn't really find templates for any 1590BB pedals

Tayda has the option to print on the "bottom" or "enclosure lid" Which option should I choose to print on this part? I'm guessing enclosure lid but I just want to confirm.

I know hifi guys will put a fast discharging cap in parallel with a bigger cap to prevent smearing of high frequencies but that's outside the range of most instruments. Noble strikes me as coming from the hifi world so perhaps it's a carry over.

Thanks! What is the purpose of C13? I can't imagine 220uF vs 221uF makes much of a difference

What is the minimum voltage rating for C13 and C14? I'm looking a Panasonic caps that only go up to 10V also 2mm or 2.5mm lead spacing?