Search results

It's the carbon film and mlcc that makes the difference 💅

Correct on both counts I only messed with the resistors in the LFOs, but swapping out the caps for other values might yield better results for the lower speeds. Any higher than 11k on the slow LFO and it lost all of its depth. The faster LFO could probably be made adjustable with a 50kb dual

Moonn's AluTonez (SHO pushing a LofoMofo) and Mean Queen (Bastard Muff fuzz Klon mashup) running parallel. I wasn't particularly impressed with either circuit on their own, so I figured I'd mess with em in parallel. Together they sound pretty awesome in a filthily scuzztastic way. They both have...

I don't care for the modulation provided by this, but the full mids superfuzz variant it houses is rad, though it does lack some output volume stock Mostly stock, mods being - R9 reduced to 1k for better octave matching, and attached to an spdt to kill the octave R17 increased to 270k for more...

Awesome, thank you! I need to clear the jobs on my bench, then I'll give this one a go. If needed, I'll throw a buffer in Yes, I'm wanting to completely remove the HX from the path (tails are fine, but I don't use delay or reverb anyway)

Close, but not quite what I'm wanting. I basically want to take the HX out of the chain, leaving only the dirt. I feel like I've seen something that could do that previously (think it was used on a delay) but can't seem to find it on the googs

Does anyone have a schematic for a switcher to take a pedal out of an FX loop? My use case is the HX FX- I want to have my gain pedals in the loops, but want to be able to run them stand-alone with a button press

1590J

Fuzzdog: Moonn: No issues from either. I've got a decent stash of XRs, if you need one

So, thinking about this concept, I think it could be cool, but might work better with a reverb. My buddy's got a few ambient things he wants built, and he loves the blast switches, so I'll try it on at least one of those and report back

Yet Another Analog Delay Only components that differ from the doc is R45- I went with 24k, and I used an NE571 FX loop is inserted between Lug 2 of the FDBK pot and the board BLST shorts lug 2 & 3 of the FDBK pot, and puts a 10k in parallel with R45 Spent about an hour troubleshooting this...

Are you consolidating all the ring mod requests to give us the ultimate in dissonant bells and angry Daleks? (Also, deleting all the YATS requests? 👉🏻👈🏻)

Been waiting on this, too

I was gonna place an order for 20 125Bs and the pots I posted in the mailbox thread yesterday. Shipping and orange fuck tax would have been $124 Previously, this would've been around $30. I can source the Hammond powder coated 1590N1s, but the cheapest I've found is about $13 a pop As for...

Swapped out the fuzz pot after looking everything over. Still distorting CCW So, I thought maybe overdriving the input of my preamp... Nope. Here's a gutshot to see if any values are off that I missed. Barring that, I'll try some different chips tomorrow

That's what I thought too, when recalling the last one I built. I'll take a look when I get a chance

Until the end of the longer video, when I add the Rat, yes. It's pretty dirty as is

I didn't have any 2n3392, so I grabbed the first transistors I found in my stash with the same pin out. Those happened to be 2SC1815s. R4 & R8 reduced to 270r to push the input and output a hair more. 1.5k added between lug 1 of the Sens pot so it doesn't bottom out Big, nasty, clangy. Build it

Built to the doc, except I replaced the diodes in the envelope detector portion with BAT46, reduced the Sens / Sweep pot to 5k w/ 4.6k from lug 1 to ground, and added a 50kB in parallel with R34 & R35. This effects the response of one of the formant filters, and is highly interactive with the...