Search results

I used to buy some PedalPCB's PCBs from an European shop, they sold them in kit with the components you need, but not with the FV-1 soldered. Unfortunately, to buy directly from PedalPCB I got higher delivery cost and fee.

It looks nice, indeed! I built a simple PT2399 delay, but I'd like something more modern like that, with the FV-1. I just afraid to solder it on the PCB. Is it hard to solder it?

Maybe you can reduce R3 and maybe also R8, to push more gain before the last stage.

What about a second Tommy III? If you want a boost I think an opamp based one will be good to get more distortion. If you want an alternative and heavy sound you can pair it with a fuzz (Fuzz Face, Big Muff, any one knob fuzz...) or a distortion (Distortion+, Crunch Box, Rat...), the list is...

Thank you. I'm from Italy, it's a bit hard to find exactly the same PSU you got. I hope some PSU for the same device will be good. I tried a 12v with center positive once, and I reversed 9v and ground wire on the DC jack of that circuit I want to try. I think there's no problem with it, because...

Thanks!

I didn't recognize the board. What pedal is?

Thank you! ;)

Thanks, soothsayer86. What I mean, actually, is how can fit this ring LED footswitch without the pcb. I usually don't use PCB for the switches. I afraid the footswitch it's too tall and I can't close the box. A 125B probably is ok because is the taller. I'm not so sure about the 1590B and 1590A...

Did someone try to fit this bigger footswitch in a 1590A size box? Somebody says those footswitch can fit in a 125B, but some seller told me it fits even in the small 1590A. I didn't see any 1590A box (maybe neither 1590B) with this footswitch. I afraid it is too much tall that it can touch the...

Hello, I built the circuit of the JHS @ AT pedal. The PedalPCB schematic, as well other variations of this pedal (Angry Charlie, Crunch Box...), has a 10k reverse log pot as EQ. So I tried it, and in combination with the Air pot seems to work fine, at my first tests. I know that the original AT...

Cool! I took of this power amp from the cart in my last order because I have really nothing to power it up. Unfortunately, I don't have any PSU laptop, it seem hard to be answered but, what PSU I could buy for it.

LM386N-1, LM386N-4... Maybe LM386L? I can't read it from the picture. Just if you can remember or see it. Thank you. :)

What kind of LM386 did you use? Somebody got problem with it. I would like to build it, but any time I change my mind.

For me it isn't so easy buy some used stuff. I hope I can find something, asking around, or in some shop. About the noise, the thing can be a problem. Someone told me that a filter in the output of the PSU (on our circuit board) is almost useless if there's no filter in the input of the PSU, I...

Hello. I still never built none JFET emulator amp, but I guess I read about the Dr. Boogie that at higher voltage like 36v can help bigger trimmer value: 250k, 500k maybe?

This is the point. I really don't know what power supply I need for these amps.

Hello guys. I built some mini amp, a pair based on the LM386 and one with the TDA7052. I've been stuck for a long time with a TDA2003. I wanted to do something great with two channel preamp, boost... a long story. I would like to buy a TPA3118 Power Amp board now, but my main problem with this...

Reducing the coupling caps in the Muamp (C4, C11 and C10), will cut bass, but even some high, if my emulator software doesn't lie. If you remove C13 and C14 or simply reduce them, it will work very fine, I guess. It was the same thing on the BSAIB schematic. It's a sort of Bright Mode.

Thank you HamisR for sent me the project file. I tried to make the movement I told early. The target was to take away the input track from the close Middle pot track, assuming that could give some annoying about the oscillation/squeal this effect gets with mid and gain at max, or at extreme...