Search results

Thanks I’ll take a look at what’s in stock. I’m more hesitant to try components when I can’t socket them. So I appreciate your suggestions!

Sorry, the change from v2 to v3(sps) went from tle 074 to opa4134. At least that’s what I can tell.

Noted! That was my other question. It’s two vfe sps builds. I think it replaced the tle074 in those circuits

In search of two opa4134’s. if you know where some may be acquired before 2023 it would be greatly appreciated.

I have used the ggg stratoblaster boost for a clean tone. I really enjoyed how it polished the guitar tone. It was a telecaster with single coils, so take that into account. I got rid of that pedal so I could build more pedals. Now I use the byoc 5 knob comp. the ratio set from 9:00-13:00 and...

Hmm… I have a 1n4742a but from what I understand it’s a 12v equivalent

I'm not sure if this will help, but here's what my transistors read. However, you can also compare your values to the original Daily Driver to see how they compare to yours. If all the values and orientation are correct I would try reflowing all of the solder points and start with the ones...

Have you tried measuring the voltages of the transistor on the original vs. The clone? For that matter you could measure all transistors and ic’s to see the difference. Also I would be curious to hear the difference between the two!

I’ve done something similar. I was populating two boards at once part way through I mixed up the build docs. I can’t remember how many resistors I had to redo. It sucked. I’d like to say I learned to take things slower and focus on doing one build at a time, but no, I’m still reckless.

I’m not familiar with the “dynamic” squealing your experiencing. Though the video clip does remind me of the oscillation some fuzz pedals try to achieve. Anyways, have you checked component values and orientation? That messed me up on this build. Also, if you have an extra 7660 or one that you...

From what I know, which is admittedly little, you should be able to get these circuits working together. Pictures will go along way in troubleshooting. Do the circuits work independently? Or is it just when both effects are engaged with the order toggle in a specific setting

I love the graphic. It fits the EHX vibe perfectly. I’ve built the vero version. I do like the pedal and go back to it every once in a while, but it hasn’t stayed on my board for more than a month at a time.

Looks good! I’m glad the chips showed up

I agree. I like the pedal, but it takes time to dial in. I appreciate his 6 control layout on his modulation, reverb and delay pedals. but it can be daunting on the drive pedals.

The builds look good. I'm curious to know what tonal differences you notice between the three. I know the struggles! I built the VFE pale horse and setting the tone controls took a while. I'm still not certain I have the frequency trim set where I want it. I returned it to the stock setting a...

Those look great! There’s so much love for the mojito and the dung beetle on this forum. I’ll have to add them to my “must build” list.

Nice and clean!

I have this one on my list. Though I have considered waiting until the Daisy seed version is released!

I had this issue with several programs. I ended up with affinity design and asked Spencer’s the dimensions for a 125b faceplate. I can’t remember if I asked spencer about the graphics as well or if I shrunk the template to the size of a 125b and hoped for the best.

I’ve tried many different types and material of picks. Some were fun for a while or a novelty. But for years I’ve used jazz iii’s ultex. I use both the 1.14 and 2.00mm. I’ve tried and lost the chicken picks badazz iii 2.5. They were good but I didn’t think they were better than the dunlop just...