Search results

Blue side sounds absolutely glorious. 10/10. Green side has almost no gain. Volume and tone work as expected. I have built a few of these, so I know something is amiss. Really scratching my head. I believe all components are correct except a few I didnt have: 2n5457 instead of j201...

All knobs work as expected and the tone is very good. I understand that all drive pedals will add some noise (I have built a bunch), but this seems excessive. A couple of notes: 1) Bypass sounds fine with no extra noise, so I am assuming there is not a jack grounding issue, 2) I swapped the...

I don't have any. I could get some tomorrow at my local electronics shop, but I still have a few beers left and was hoping to finish it tonight. I have all the usual suspects, 4148, 4001, 5817, 4742. Would any of those be appropriate substitutions? Thanks in advance.

What can I use? I have all the usual suspects.

Well?

I don't have any 2n5458s. Do have 2n5457, j112, j113, 2n5457 among others. Could I use any of these? I assume the goal is to bias to 1/2 of the 9v supply? Thanks in advance.

This thing sounds killer, gets into univibe territory to my ears. Short of pulling it out of the box and changing the speed pot, is there a resistor change I could do to increase the speed? My build works fine, just hoping to get more available speed. Thanks fellas.

I was thinking of making a double with an episode and some sort of OD. On hand I have a 763, a Mach-1, and a guitarpcb TS. I play blues/RandB stuff in a few gigging bands. What say you for the second circuit in a double?

So, I bought the board, did some resistors and then realized I don't have the something 408 diode. What should I get? EDIT: I am sitting here looking at the populated board that is missing one part.

Where?

Got two boards ordered. What bulb is needed? Which LDRs? If the answer is STFU and wait for the build docs, then that is what I will do as a I fantasize endlessly about the warbling swooshy tones to come.

I have built 70 pedals or so, but mostly 808's and various other simple overdrives, phase 90's, PT2399 delays and such. I decided to man up and build this beast. Given the complexity, I have not boxed it. I ran short on TL072s, but had enough to get one side working. I am getting the most...

I want to build the Mini, but it's not in stock. The Clean appears to me (verified moron) to be the same board with some different values. Could I buy the clean and use the build guide from the mini?

I am going to build it tonight. I don't have the Zener Diode on hand. I assume that is just a protection diode? Could I use a 4001, or just jump it if I'm not worried about it getting above 9v power? Also, I find the volume on Klonish circuit to come on very fast with the B10k volume pot...

Long time lurker, first time poster. To give background on my experience, I have built around 40 pedals from BYOC and Guitarpcb. This was my first pedalpcb as well as my first foray into SMD. Thanks for the great board!! Bypass works, LEDS light as expected, and boost and chorus work...