Search results

if I want to not put a 50k internal trim pot for the clean and instead use an external pot can someone tell me how I go from the three holes in the PCB to an external pot? Also for the external pot should it be a A50K or B50k? FYI this is the Sunflower Fuzz

In my last order I order two pre drilled enclosures for my Cobalt Drive builds specifically these Click Here because I figured why have to drill if I can just pay 1-2 dollars more and its all done. The enclosures look great but the hole for the DC power is way too small for the Lumberg DC power...

To set this post up I have built a few Uber Drives aka Boss SD-1 as well as modded real SD-1 which has has 3, see attached picture, asymmetrical clipping diodes. I would like to give the user the option of switching between 2 sets of diodes lets say to keep it easy 3 silicone and 3 germanium...

Can someone please help me. I want to build this Cobalt Drive so bad but I cant find a A250K dual PCB mount pot. How are you guys building these Boss clones as they all seem to have a dual pot that I cant find

I built the Sandspur Fuzz which is the BC108 NPN pedal and all went fine doing the bias with the 5K internal trimpot. My issue is I built the Sunflower Fuzz Pedal PCB Sunflower Fuzz after and the bias was not as easy with internal 5K trimpot the build doc called for. I had to turn the internal...

There is not enough space for the B100K potentiometer next to the switch. This is the switch recommended in the build docs so it’s not like I bought the wrong switch or is it just designed to sit crooked like this? Parthenon Page

I have built a lot of pedals and all were 100% functional but I I just finished this Kliche and it doesn’t work. When the pedal is off the sound bypasses fine. When on the LED comes on but that’s it no sounds. Watch the video on YouTube for the visual details Video here Also FYI D9E diodes the...

Does anyone know if this https://www.taydaelectronics.com/connectors-sockets/wafer-housing-crimp-terminal/serie-2500-2-54mm/wafer-connector-2-54mm-9-pins.html is the “9-pin 2.54mm Male Pin Header” that should be used on this? I have never used a pin header. I built mine like you see in my pic...

https://docs.pedalpcb.com/project/Sunflower.pdf I built this Sunflower fuzz and went to bias it today and the internal bias trim is turned full clockwise abs the external sun face pot is at 3 o’clock in order for me to get 4.5 dcv. Is this normal? Seems extreme on the two pots just to get a 4.5...

I am building my first Doucast and the only part I am having an issue with is the BC549C for Q1 in https://docs.pedalpcb.com/project/DuoCast.pdf. What is the best alternative. I can get a BC549B but cant find a BC549C

Does anyone know where people are getting metal name plates for the top of their enclosures like the one on the Protein pedal by Browne Amplification or the Broadcast pedal

I was wonder is it possible to put 2 pedalpcb boards let’s say the SD1 and bd2 like boards in 1 enclosure with 1 in and out and 1 dc along with two foot switches. One foot switch to turn on and off the whole pedal and the second foot switch to switch between the 2 boards. what I do t know is...

I have been looking for awhile but I am sure I dont know a lot of the sites to look at. If anyone can give me a link to someone who has these in stock I would appreciate it https://www.taydaelectronics.com/j201-jfet-n-channel-amplifier-transistor.html

Based on the schematics at https://docs.pedalpcb.com/project/Sandspur-PedalPCB.pdf , but I am no expert, am I able to NOT add the sundial external bias and only have the internal trimpot? I will be building one with both but I cant find a B5K pot right now so I want to try the pedal without a...

I finished my board and am now about to drill the enclosure but I was wondering in anyone had any pics of a completed Little Green Scream Machine. Preferably the inside but outside too would be cool

I am close to finishing my Sandspur fuzz https://www.pedalpcb.com/product/pcb378/ with these BC108 https://www.taydaelectronics.com/bc108-bc108b-npn-small-signal-transistor.html and I realized I have no idea how to do the bias. Could someone help or point me to the info

I need helping find a good match 51p capacitor for my Little Green Scream Machine build. This is the C3 capacitor seen at https://docs.pedalpcb.com/project/LGSM.pdf I used WIMA film capacitors for all others so I would like to use a film capacitor if possible and not a ceramic or other. When I...