Search results

Well you are 100% right…just tried a new adapter and the pedal is working just fine ….no noise. Thanks so much for your support.

Thanks ….will give a different power adapter a try. (What I have is an inexpensive D’Addario I bought on Amazon) … wound so like that to be the issue …any recommendations

I am relatively new to building pedals, only my 8th and up to now I guess I have been lucky. I have just completed an ADHD and when I ran power to it using an adapter I got an oscillating sound. I checked it with battery power and it was fine and also using the same power adapter I powered it...

The pedal is on “loan” to a friend out of state so not in the near term….

oops sorry about that… I didn’t really pay attention when making the adjustment so not really sure about % of rotation.

Thanks….also on the Mas Malo top end of the Hot tends to be unusable…Bias was set using a multimeter to just over 4.5v using the TP

Hope this is helpful, my very amateur effort but it does work….followed the build doc used a W20K instead of a W25K and as previously mentioned used a 22n for C2.Set the TP at close to 4.5v Played against a Mas Malo …they are very close.

Thanks so much

Thanks for the responses …… noticed on a build kit from “Musikding” they list an 8.2V 1.3W…… how much difference if any does it make to go with a 1.3w instead of a 1/2w

Looks very nice ….. I am looking at an Awful Waffle build….. what Zener Diode did you use …

Very nice…I am planning an Awful Waffle. What Zener did you use

The PedalPCB build doc identify the Zener Diode in the Awfull Waffle as Value “8V2” and under Type “Zener diode 1/2W 9.1V.“ Should it be an 8.2V 1/2W or a 9.1V 1/2W. Appreciate any guidence