Search results

I have a clipping group that is white. The tayda pdf tool gives me an alert that "ALERT: CMYK 0,0,0,0 (WHITE PAINT) DETECTED." When I try to switch to the roland swatch it kind of fills in the entire thing and the effect I am going for gets lost. I am no graphic designer so I am a bit lost at...

Anyone know where I can find this? Trying to troubleshoot it and I'd like to see the silkscreen of the older version that I have so I can take an audio probe through it to see where the volume loss is. The only thing I did a bit differently was sub a 150uf for a 120 bc I was out of 120s. Don't...

Nice. Thanks. I also noticed at least one of the R numbers being used twice, for instance there are 2 R16. I think there were a few more but can't remember. Working on my first cup of coffee lol.

I have a question, in your schematic near the 1n914 diodes you have R16 with a value of R27. Is that supposed to be 27k?

Just grabbed them. What do I want to look for in them? I've built this a few times in the past with random j201s from the bin. I do have several hundred of them so I wouldn't be opposed to sorting them.

As the title says I have trim 2 and 3 set to 4v and trim one at 2k. (I used the venerable chuck bones method described in another thread). Still sounds way off. The volume is low and it sounds unbiased. Any points I should check in particular?

Never seen a silkscreen like this. How does one orient the 1uF cap?

I'm curious about the orientation of this cap. Never seen a silkscreen like this.

Shouldn't multiple voicing of concerns help a business better support their own decisions? Tell me to shut up about it isn't helpful to anyone. And if this has indeed been a problem for a while I think it should be addressed and if bringing it up over and over helps then this won't be the last...

Same. Not sure products should be released if they aren't finished. Build docs seem like a minimum at time of release.

Fixed. I was applying the swatch from the swatches menu and it changed all layers. Selected the elements I wanted gloss and it worked as expected so I could have the Roland white on the white layer and gloss on the gloss.

Can't specify gloss for the gloss or white for white only. When selected all layers are changed even if I lock them. Anyone know how to solve this?

Thank you.

Appreciate this! Saved me some time.

Awesome thanks. I'll socket some things and come back.

Any idea what germs will work well with this? I was cheap and didn't buy pre-sorted transistors and they were in the range from 22-70 hFE all with low leakage. What would y'all recommend? Use what I have or buy some with higher gain?

Adjusted for my preferred parts. Adjust accordingly. https://drill.taydakits.com/box-designs/new?public_key=N01zcXlEL1ZERllkOU5VNHAzckJUdz09Cg==

Taken from their build doc and adjusted for the parts I use. I also spaced the led about 2mm up to account for my graphics, you may want to take that out. Megalith <--- Link

I followed a few youtube tutorials which helped me a bunch. Lots of info so take notes. Part of my problem in this thread was not copying what I wanted in the gloss layer to be printed as gloss (I ended up just copying the layer and renaming it gloss). <----- a series of videos The main...

Would you recommend a clear coat? Or have you used any without with good results? (Last question I promise!)