Search results

I reflowed the whole mix and volume section and voila! I guess a cold joint. Anyways, thanks for everyone's input! 🤟

So using a audio prob, I managed to track down the volume / effect drop at R19 (15K). On the left side of R19 the signal is fine but on the right side of R19 the signal drops. I've checked R19 and it is a 15K. I've reflowed R19 and still nothing....

I checked the switch wiring and its fine. My phone camera is wonky but I'll see if I can use my friends. With all settings on both builds are the same (all pots), the faulty one's volume when on seems to be at about 80-85%lower than the other one and the effect seems to be about 50-60% of what...

Hey all! I just finished my second Arachnid v2 build and I'm having issues with the amount of effect coming through. Using the stock effect program 2 on the FV-1 (Flanger) as example: When i put both builds side by side with the same effect and same settings, my one build is clearly louder and...

It's pretty strange. I have another Arachnid I built a while back with the Octagon EEPROM, this is the same EEPROM I tested this current build with. I noticed that the fist algorithm (Shimmer verb) CTRL3 wasn't working as it usually did, so I popped it back into the original build and now the...

Also, is it possible to damage the EEPROM? Perhaps I damaged the EEPROM and this is why CTRL3 isn't responding?

Because pins 3 on the CTRL pots are 3.3v, does that mean that CTRL pins 2 are carrying voltage to the analog input pins of the FV-1? I'm wondering if perhaps I maybe have sent to much voltage somehow to pin 22 on the FV-1 (CTRL3) and damaged it.

Hey all! So I'm just finishing up a Arachnid v2 build and am realizing that CTRL3 is not working...no response at all. I've checked the the pot to be sure it was working and even swapped it out with another one to be sure and still no response, but everything else is working properly. I've...

Thanks for the response! Yea this is what i was thinking as well but wanted to see if anyone had attempted this with success. And don't struggle to much on understanding the practicality of why I want to add LED per program, I have what some call, studio OCD... ;)

So I just finished building the Arachnid and been thinking of ways to show what program I'm on with the rotary switch. I've seen several ideas but landed on individual LED's per program change. Has anyone got info on where to connect the LED's ? Thanks in advance!