Search results

  1. NickC

    Ds2 mods

    tried the cap modification, but it's too subtle, I think I'll try the wampler one or maybe part of it MOD DETAILS: R57 - change to 3k3 R44 and R62 - change to 1k C28 - change to 10nf capacitor AND 1k resistor in parallel D8 - change to 1N4001 D9 - change to 1N4001 AND 1N34A in series D11 -...
  2. NickC

    Ds2 mods

    I use it on a jcm900 with hotrails minibukers 👍 i will try this mod thank you
  3. NickC

    Ds2 mods

    I have an old Boss DS2, I like the way it sounds but I would like to remove some of the fizzy, can you recommend some mods?
  4. NickC

    SOLVED kliche mini gain pot strange behavior

    by mistake I had put a 10k resistor in the r7 and also in the r12! thank you very much to everyone and to @Robert :love: , now the pedal sounds great! thanks to this forum I have saved my ass a lot of times 🙏
  5. NickC

    SOLVED kliche mini gain pot strange behavior

    with gain pot to max those 4 pins are connected pot gain to zero those are connected
  6. NickC

    SOLVED kliche mini gain pot strange behavior

    Some specific advice?
  7. NickC

    SOLVED kliche mini gain pot strange behavior

    ic1 pin 7 is 4.5v and S4 is 0v ic2 pin 8 is 16.30v ic2 pin 4 -8,6v
  8. NickC

    SOLVED kliche mini gain pot strange behavior

    yes a plastic adesive button
  9. NickC

    SOLVED kliche mini gain pot strange behavior

    everything seems to work well except the gain potentiometer, at zero no problem, then as it turns up I hear a decrease in the general volume and an increase in compression and towards the end the distortion increases, yet I tested the 2 germanium diodes before mounting them and they work. the...
  10. NickC

    Help me decide which compressor to build…

    +1 General Tso a great comp
  11. NickC

    Dandy Horse (Echoflanger)

    I compared the dandy to the neo clone, you can get the same tone but warmer and more musical, the neo clone and probably also the small clone it's as if they cut the low frequencies and sound more metallic.
  12. NickC

    Dandy Horse (Echoflanger)

    update: in flange mode with blend on and zero feedback and setting the other controls by ear I got the most convincing sound I've ever had for Soundgarden's black hole sun verse (the high guitar part)
  13. NickC

    Dandy Horse (Echoflanger)

    Presets settings also in full analog way!
  14. NickC

    Dandy Horse (Echoflanger)

    At the moment it was the most complicated project to do, both for the graphics of the PCB (used to those of pedalPCB) and for the whole calibration thing, in fact I had to use an oscilloscope to make the task easier. In the end I'm more than satisfied, I manage to get what I wanted, the guitar...
  15. NickC

    Echoflanger

    I'm about to build this pedal, can a DSO138 be used as an oscilloscope?
  16. NickC

    Sequel Distortion info

    I just saw this project :love:, I would like to know if it is based on the original circuit or on the made by mike version
  17. NickC

    need for boss closed frame jack spec

    at the moment i don't have it, i need the measure/specs for the Boss close framed jacks, the hole too if possible. thank you folks!
  18. NickC

    Silverburst Octarock

    with 2 different spray cans, first give the base black (in my case it's a pearly black with glitter) and then blend the metallic gray and then black again on the sides, it's simpler than it seems. In the photo it doesn't reflect what it is in real life which is definitely more beautiful.
  19. NickC

    Silverburst Octarock

    I had the first original version but the enclosure was too big and I was looking for a more compact version, the sound is identical, the external switches are very nice , excellent project. A special thanks to @DGWVI for the transistors problems.
Back
Top