Search results

  1. Idlebeach

    1n941b alternative?

    I ordered a "The Gent" PCB and I didn't notice before ordering that it calls for 2x 1n941b. I'd never seen that before and it looks like they are pretty pricey. Are there any good alternatives? Can I just use a normal 1n941? Thank you!
  2. Idlebeach

    Master Fuzz Controls - Does This Sound Right?

    Cool! Did you also experience the Fuzz knob pretty much just being a second volume? Thanks for the post link, I will check it out!
  3. Idlebeach

    Master Fuzz Controls - Does This Sound Right?

    No worries at all! I will attach a photo album HERE and the build doc/schematic again HERE. I tried replacing the Fuzz pot last night but it didn't make a difference. It still more or less acts like a second volume.
  4. Idlebeach

    Master Fuzz Controls - Does This Sound Right?

    I'm not sure if attack and fuzz are the same but this doesn't have an attack control.
  5. Idlebeach

    Master Fuzz Controls - Does This Sound Right?

    I checked with a multimeter and as far as I could tell the voltage didn't change. I cleaned the PCB and reheated joints so I'm stumped. Switch works and the effect sounds right... just not sure about this Fuzz knob.
  6. Idlebeach

    Master Fuzz Controls - Does This Sound Right?

    Does the Fuzz knob even do anything at Q2? Looking at the schematic it doesn't look like it would affect any of the transistors. It just looks like a loop with a cap and a resistor right before the volume. I'm still a schematic dummy though. That said - I can give it a shot later. Thanks for...
  7. Idlebeach

    Master Fuzz Controls - Does This Sound Right?

    Hey gang! I just built the Master Fuzz and it sounds nasty (in a good way)! I am trying to determine if the controls are working correctly. I know some old circuits controls are kind of useless. The volume works as expected. The fuzz knob also pretty much just acts as a volume - it gets much...
  8. Idlebeach

    Missing Build Docs / Schematics

    Does anyone know what color the LEDs are supposed to be on the Revel Overdrive? Also - I noticed the PCB number was 666. Very clever! Haha.
  9. Idlebeach

    Missing Build Docs / Schematics

    if you just need the BOM you can find it here : https://forum.pedalpcb.com/threads/cleric-fuzz.15009/
  10. Idlebeach

    Missing Build Docs / Schematics

    Could I get parts lists for a few builds? Looking for Infrared Overdrive, Ultraviolet Distortion and the Revel Overdrive. Thanks a bunch!
  11. Idlebeach

    Missing Build Docs / Schematics

    Can I get the drill template for the skeptical buffer? Got it together now I just need to box it. Thanks a bunch!
  12. Idlebeach

    Missing Build Docs / Schematics

    I know it just got released but if there is a Skeptical Buffer drill template/parts list handy I would love to order the parts for it. Thanks! Lots of cool projects coming out!
  13. Idlebeach

    Cleric fuzz filter

    I am curious if anyone could tell me if their cleric build is also extra dark on the bottom "rat" setting. All the settings sound a little dark to me but the top and middle are usable the bottom one is super dark to the point where I don't find it usable.
  14. Idlebeach

    Missing Build Docs / Schematics

    Can I get the drill templates for : Cleric Fuzz & Decadence Preamp Thanks a bunch. I appreciate you!
  15. Idlebeach

    Missing Build Docs / Schematics

    Can I get the drill templates for Decadence Preamp & Cleric Fuzz? Thanks a bunch! I tried finding ones that matched but they didn't seem quite right.
  16. Idlebeach

    Missing Build Docs / Schematics

    Can I get parts lists for : Decadence Preamp & Cleric Fuzz
  17. Idlebeach

    Pyrocumulus - Sustain knob mostly effects tone last half of the sweep?

    Good idea! I recorded this through an ACS1 so hopefully the low end is more apparent as the gain is turned up. Thanks!
  18. Idlebeach

    Pyrocumulus - Sustain knob mostly effects tone last half of the sweep?

    Hey! Sorry for asking for help so frequently! I appreciate you all. I built this Pyrocumulus (Thorpy Fallout Cloud) for a friend and I'm not confident about the way the sustain knob works. It definitely increases gain but most of what is happening toward the end of the sweep is it's adding a...
  19. Idlebeach

    Double checking Pot and Kettle Boost/Preamp Behaviour

    Edit : Read another post where they talked about the switches and they mentioned the boost toggle does engage the preamp knob. Sorry for the extra post! Not sure I can delete this. Howdy again partners! I built the Pot and Kettle recently and I'm not totally sure if it is behaving correctly...
  20. Idlebeach

    Best way to use transformer with old Conqueror PCB?

    No hurry at all. I would love that!
Back
Top