Search results

Finally i replaced all the transistors and the pedal works fine now . Thanks for the help

I use an guitar . I hear also and alot of hiss and blow .

Many thanks my friend but I have tried adjusting the trimmer and nothing happens , no hearing any difference.

i recently finished this project the Fornitus Overdrive but i have an issue seems to work the volume , hi-cut and Drive i hear the differences when turn the potentiometers but i did not hear any differences while i turn the Threshold potentiometer (only i see some changes at led) also no...

Ok thanks for the response i will check it

Thanks again for the reply. I have replaced the SD101A diodes with the BAT48 ones, I found and bought them yesterday. I tested the pedal with the right diodes (with the fx loop, with its output volume very low) but I had almost the same results. I'll test it with other sources as you suggest...

Hi and thanks for the response. -The signal to Low Tide is from a rather high output "fx" loop device, It records audio from guitar or whatever and plays it as a loop with pitch control, sometimes i use only a semi hollow guitar with the LowTide Both dip switches are off. -The diodes I used...

Hi all. I built the Low Tide pedal “kit”. At a first glance it works well. But I noticed something that’s strange to me. I don’t know if this happens to others. Without any adjustment, the GATE potentiometer (LPG), acted almost as a GATE only, and not also as a variable low pass filter too (as...

Ok i will check it . Many thanks once again

I tried to fix via the trimmer setting but as i said i can fix it the pedal works well but after i close from power the pedal after a few hours this issue comes again and always must set the trimmer or sometimes the trimmer no help . Thanks for the interest

I will see i will start a troubleshooting thread maybe someone can help me more . Thanks for the interest no worry !

Yes you are right Thanks

I have an issue with the final project of low tide modulator the pedal is ready seems works fine and the effects works fine but the low pass filter (gate control) some times works only as a gain into the input signal and cutting the sound i hear the sound only when the gain let it . I try to...