Search results

I've built the Crunch Captain (not deluxe) and it works fine. But the Presence control is unusable after about 10 o'clock on the pot (way too much for my taste). It's a B20k. Would a B10k give me a broader sweep? or maybe go to a A20k?

are the toggle switch positions from top to bottom just as they are listed on the Threeverb page? Top=Hypernova (modulated), Center=Glimmer (shimmer), Bottom=Radium Springs (spring)? and the top knobs are (from left to right) Dwell, Control2, Control3?

I just laid this circuit out on a breadboard and it has way too much treble. It looks like R9 and C10 are a low pass filter. If I increase C10 from 3n3 to 10n, I think it will lower the cutoff frequency by about half. Not sure how much this will help if the bass freqs are already cutoff...

What is the purpose of the jumper usage on the Protoboard? I just built it and the individual pins have the correct voltages. Why would I jumper them? If I do, how the heck would I use these pins/voltage?

I see that others have built this pedal, but there's no build doc. Is there a parts list somewhere? thanks

Any issue substituting a A100k (audio taper) pot for the volume control. I don’t have another B100k on hand at the moment.

Trying to figure out calibration for the Byzantium before I order the board. Should I be setting the clock at 40khz like the Boss BF-2 (and where? because the schematic and TP locations are blurry and unclear on my copy. TP1 looks to be between the two chips on the board layout), or 50khz on...

The PT2399 chips are hit and miss, always need to try a bunch of them. I'm looking at the FV-1s and am wondering if they are quieter, but I see a couple of threads that suggest they might put out some white noise too. Anybody make one from this site that is really quiet? I'm contemplating...

This may be a stupid question, but I have to ask it...I've built many pedals, including a bunch from this site, but I'm looking at the Threeverb that uses the programmed FV-1. It lists 6 controls... dwell, volume, mix, mode toggle, and then there are two other "Parameter 1 and Parameter 2"...

I just built the Promethium. It sounds good and all the controls work, but the drive control seems to have very little difference across its range. At least I can't tell much of a difference. Does anyone else's seem to have more drive range? EDIT: I have a Siren Eligos, which is also based...

just built the muzzle and it works great. only issue (if it is one) is that when I kick it on the volume increases. anyone else find this? I see threads about volume decrease, but not increase

I just built the pendulum and it works fine, except that the volume goes from nothing until about 9:00, then it come on and has a small area where I can control the volume until it gets really loud, really quick. Sound comes on at 9:00, by 9:30 it's really loud. Any suggestions? Maybe a...