Search results

Love My Switches

What mods are those switches up top?

Nate, I just finished building the wrecking ball and WOWSERS it’s good! I did have a couple of notes. First, the 4u7 25V cap from the build doc doesn’t seem to be needed as there isn’t a place for it on the board. Secondly, I used your artwork file (thank you for supplying) and Tayda sent me an...

Pads 5-9

Some of those solder connections look cold or dry. Here is a graphic to show the foot switch wiring off board, maybe it'll help with tracing. Post in thread 'Paragon footswitch brute trace lifting' https://forum.pedalpcb.com/threads/paragon-footswitch-brute-trace-lifting.16480/post-191843 I'm...

Clean as a whistle! Well done!

I would try it with the 12v output. It says it's good for 50 watts. Worth a shot, you can always return it if it doesn't work.

Correct

Works fine in my experience. i've got two in serial in the FX loop of a Deluxe 85.

Yes I did see that. PPCB forum wasn't able to load for a few hours.

100-150mV @ 1kHz is what I use.

According to your diagram, #2, #3 and #6 all need to be connected. I only see #3 and #6 connecting

Apologies, I had the wrong numbering scheme in my head. The shorting pins #7 and #8, according to this diagram:

On your footswitch, pins #3 and #6 look like they are shorting out.

Just finished boxing those Edcor. WOW! I only used my cans into a Mackie 1202 for a quick test but I can hear a HUGE difference! Warmer, fuller...all kinds of goodness. I'll try to get a more scientific test and maybe even make a video.

Your pot connection looks bridged between the green and yellow. Your switch off board wires look like they're not.....something. And I'd double check all those pots you've gone off board with. I'm suspicious of some of those landing points.

I just picked up a couple of these for some more DI boxes and I'm interested to hear if they're "better".

I believe the LDR needs to be positioned near the LED and sealed up so no light leaks for testing.

Congratulations on joining the solder sniffers club! Resistors: I use metal film. You can use carbon if you want that "old school mojo". Capacitors: Look at the footprint on the board. If it's rectangle, use film caps. If it's a circle, use electrolytic. Generally speaking...if the value...