Search results

Thanks! My bad, I didn't print the whole document.

Looking for printable drilling template for Equilux Mini.

Solved it. Turns out I lifted 2 of the pads trying to mount the 4PDT switch.

I suspect it is switch 1 as I had probs mounting the switch and may have popped the top pad off the pcb.

I'm not getting any sound on the silicon side of my fuzz foundry deluxe (germanium and bypass are working). Can someone provide me with the audio path from input to the si transistors so I can trace? Thanks in advanced.

I opened up a switch an flipped the tab but that didn't work. I believe the switch I used had an off center balance post as the one side of tab was mirror of other side.

OMG. Too much confusion! DPDT, DP3T, Type 1, Type 2, switch schematics all over the place, jumpers from post 3 to 5, etc, etc. I sure hope the Musikding switch works.

Musikding has them. Only costs me 5.00 for delivery. I can live with that.

The Tayda switch I received was a type 1. Unfortunately, opening up the switch and reversing the posts didn't work either.

The diagram above is a type 1. I require 1 and 2, 5 and 6 to be connected.

According to the datasheet it's a type 1. I'll order one and try it out. I buy 90% of my parts from Tayda.

I'll give it a try. Thanks!

Pedal I'm building specs in a dpdt on/on/on (Type 2) switch (100-DP6-T200B1M1QE). To order this Taiway switch, I would have to pay $17.25 in shipping from Ilovemyswitch (I'm in Thailand)! Is there a substitute or is it possible to modify a dpdt on/on/on (Type 1)? Thanks in advance!

Unbelievable, I ordered MMBFJ201. The bag is labelled MMBF0201. I'll delete previous post. Guess I'll have to wait for my MMBFJ201s from PedalPCB. Remind me to never build anything with J201s in them. So far I received fake parts from 2 suppliers and the wrong parts from another.

Success! I incorrectly thought that the Swc input turned on and off the 9v. Lesson learned and I profusely thank you. Glad it didn't take 22 pages this time! Next project Pitch Witch w 1/8w resistors!

R4 is ok. No resistors touching transistors. Q5,Q6,and IC all reading 0 volts. 9.1 volts getting to PCB and R1.

None, but I have the same prob as his so I figured I'd try to see if his solution cures my prob. I'll complete your requested measurements first.

Saw that Egrenier solved his prob by replacing his 071 IC. I will also do that.