Search results

It works! Thanks!

There it is. I'll try and get that redone.

Nope, I guess it's time for a long afternoon with a multimeter. Is there a shortlist of parts that control the timing that I can look at first? Shouldn't be, no.

So, I was finally able to swap the pots around (broke them of and put new ones in) but the problem seems to have gotten worse. Any ideas?

Makes sense. Thank you so much!

So, basically I can wire the CHS1 pad to any part of the box and it'll work...

The problem has been solved. Works just fine now. I can wire the pad to the bolt, but I've measured the resistance from the XLR to the spring and it is zero - shouldn't that serve the same purpose?

I noticed that, but I can't find what that "G" pin corresponds to. I can only see the 3 that I wired up.

This is the best schematic I can find: https://www.mouser.com/ProductDetail/Neutrik/NC3MD-H?qs=43pPWqpsSNtroE%252BZVg28Dg%3D%3D&gclid=EAIaIQobChMI4JL0hovG_AIVlonICh1BfgubEAAYASAAEgIO6fD_BwE

Update. I got everything to work and it turns out the LED is wired backwards. I gotta figure out how to fix that. Still confused about what to do with the CHS1 pad.

I've identified an issue with the wiring of the jacks that I'm planning on fixing tomorrow (they're designed to act as switches so the pins I wired up are disconnected when the cable is plugged in). I also sanded off a patch of the powder coat so the spring can make contact. As for the XLR jack...

UPDATE 1: Works just fine now. Working on figuring out what to do with the CHS1 pad. UPDATE 2: Got everything sorted. Thanks everyone! Not a PedalPCB build but I need some help troubleshooting. The MBP Sludgehammer that I just finished isn't working. It doesn't even turn on and the direct jack...

Never mind, I swapped the Lag and Rate pots around and I don't have a good way of fixing it so I guess I just have a weird sounding paperweight now.

This is pretty much the slowest it'll go, which is a fair bit faster than any demo I've seen. All knobs at 100%, rate all the way down.

Yeah I got it figured out. Is the rate supposed to be so fast though? It becomes pretty much unusable for anything other than wacky effects past 20%.

Hi All, I just finished building a Caesar Chorus and it seems to be functioning like a synthesizer instead of a chorus. Turning the blend knob up kills the sound entirely and the pedal starts emitting a single sin/triangle wave (depending on the setting of the shape switch) as the speed knob is...

Not PedalPCB, but there's a 2n2 capacitor in the SludgeHammer B.O.M. (C12) that does not appear in the shopping list. Anyone know what it should be? Looks like either ceramic or film based on the size.

MBP SludgeHammer

I figured, but I'm building another 9v circuit that says "25v minimum" on all the capacitors so I figured I'd ask.

I'm buying parts for my Caesar build and there's no voltage ratings (just sizes) listed for the capacitors. Is there a lower limit I should be keeping to?