This mixer unit has a missing resistor , also where should the wires be soldered to in unit. parts=
1=in... 3=out battery mixer unit.
……………………………………………………………….
resistors; 1k -one off on board.
; 100k " " "
; 56k " " "
capacitors; 10 uf-10v electrolytic caps=3 off. on board.
transistor; 2SB173. on board.
1= resistor on board missing, ? not sure of value.
----------------------------------------------------
In enclosure; connected.
resistors; 22k = 3 off.
a100k potentiometers = 3 off.
1/4 jacks = 4 off= 3 out...1 in.
------------------------------------------------
1=in... 3=out battery mixer unit.
……………………………………………………………….
resistors; 1k -one off on board.
; 100k " " "
; 56k " " "
capacitors; 10 uf-10v electrolytic caps=3 off. on board.
transistor; 2SB173. on board.
1= resistor on board missing, ? not sure of value.
----------------------------------------------------
In enclosure; connected.
resistors; 22k = 3 off.
a100k potentiometers = 3 off.
1/4 jacks = 4 off= 3 out...1 in.
------------------------------------------------
