Amentum C1 MLCC

[kweefthief]

Hey everyone! I was planning to start my first build, the amentum boost, and realized I dont have a 100pf film cap but I do have a 100pf MLCC. The pcb outline for C1 looks like it fits a film cap and I was wondering if putting a ceramic would change anything or matter. Thanks!

 

[steviejr92]

Yup you should be good to go! 100pf are MLCC sized usually not in film anyways!

 

[MichaelW]

Yup you should be good to go! 100pf are MLCC sized usually not in film anyways!

Actually Mouser does carry 100pf Kemet Film caps. (Or maybe they're Epcor) I have some. But they're not necessary 99% of the time. MLCC is fine and is what I used in my Amentum Build.

Edit: They're KEMET. Here.

 

[kweefthief]

thanks guys i put the pot on the wrong direction so im waiting for some desoldering wick to deliver. at least theres only one pot :|