Apraxia (Procrastinator/ Chalumeau)

[Pauleo1214]

This is my first time posting a thread. Here is a Procrastinator heading into a Chalumeau. The only mod here is I added a 1M log pot that feeds the output of the Chalumeau back into its input. The one step delay/ fuzz makes a feedback control highly usable on this circuit! Pardon the lack of knobs.

 

[r.callison]

Got a FLCL vibe with the art, dig it

 

[foaminginfection]

Question: I know this is an old post, but could you explain how you were able to make two pedals into one? Looking at your wiring, it appears that the DC jack power hits both, but other than that, is it just the out signal on the footswitch going to the in post on the second switch? Is it really that simple? Also, does this require additional power beyond a standard 9v? Thank you!

 

[Pauleo1214]

Question: I know this is an old post, but could you explain how you were able to make two pedals into one? Looking at your wiring, it appears that the DC jack power hits both, but other than that, is it just the out signal on the footswitch going to the in post on the second switch? Is it really that simple? Also, does this require additional power beyond a standard 9v? Thank you!

Welcome to the forum and welcome to combo building!

That is precisely what I did, and it is that simple. The middle lug on the third pole of 3PDT for the Procrastinator connects to the middle lug of the first pole of the 3PDT of the Chalumeau. You may simply connect both PCBs to the DC jack as well, no additional power is needed. Power to both circuits will be 9V.