SOLVED Black Tiger Boost Issues

IPv6Freely

Active member
I was pretty sure this was the simplest build on PedalPCB, and yet here I am with another failure.

XxqhetP.jpg


First thing I noticed was that my bypass light was on (though dim) as soon as I applied power. It brightens when the switch is pressed, and then dims again when the effect is turned off. If I kind of push on the LED slightly, it turns off briefly. WHAT.

No sound at all when the effect is engaged. Bypass works fine.
 
Last edited:
I was pretty sure this was the simplest build on PedalPCB, and yet here I am with another failure.

XxqhetP.jpg


First thing I noticed was that my bypass light was on (though dim) as soon as I applied power. It brightens when the switch is pressed, and then dims again when the effect is turned off. If I kind of push on the LED slightly, it turns off briefly. WHAT.

No sound at all when the effect is engaged. Bypass works fine.
Can you pull it out of the enclosure so that we can see the other side?

Also, I'd say the Amentum is an even easier build, if you're looking for an easy to build boost.
 
Looks like it's related to the jumpers from the main PCB to the 3PDT PCB...


IMG_2166.jpg

EDIT: Forgot to mention, once I got it out of the case and got it to where the LED isn't lit up while off, the boost worked perfectly.
 
Back
Top