You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
C2C Electronics - Tayda Drill Templates
- Thread starter vigilante398
- Start date
vigilante398
Authorized Vendor
Just added a template for Wrecking Ball, I'll try to get artwork files today or tomorrow.
Hey, first timer here, and i had a question or two about using these templates / artwork. When i upload the artwork to Tayda what I should put for data in color layer, white layer, and gloss layer?
for the nobelium - white would i put yes in white layer and no in the others -- and for black yes in color layer and no in others?
for the nobelium - white would i put yes in white layer and no in the others -- and for black yes in color layer and no in others?
vigilante398
Authorized Vendor
Exactly this. I don't have anything in gloss layers in my files.for the nobelium - white would i put yes in white layer and no in the others -- and for black yes in color layer and no in others?
Tassieviking
Active member
On the C2CE website on the "Drill Templates And Artwork Files" page there is a link in the text up top that goes to an example of how to order boxes with drill and paint files from Tayda. https://c2celectronics.com/wp-conte...Electronics-Enclosure-Service-Walkthrough.pdf
I use it every time I order a new box because my memory is crap these days, it makes it really easy.
Cheers
Mick
I use it every time I order a new box because my memory is crap these days, it makes it really easy.
Cheers
Mick
Winterbloom
New member
They changed the procedure at Tayda, so now you can directly order your drill / paint jobs and your enclosures from https://drill.taydakits.com/dashboard. There is also an explanation video on the site. I did it, is is easy.