OD is Glorious
Well-known member
- Build Rating
I had problems with my Vibrobot build so I decided to continue fitting PedalPCB boards in smaller enclosures. Yesterday I put a PedalPCB Copper Clad in a 1590a and today the 1590b. The enclosure is shallow and I like side jacks, so I tillted the board toward the footswitch. I really like the pedal and it sounds so Plexi to me... Maybe that is why I dig this Fuzz.
Oddly enough I think it is easier to put in a 1590a. Maybe because there are fewer ways to fit the components.
For this build I used a Tayda Green sparkle enclosure. Inside I used Lumberg jacks and a green led. I chose a large 32mm knob and I used 1/2 inch white vinyl letters.
Oddly enough I think it is easier to put in a 1590a. Maybe because there are fewer ways to fit the components.
For this build I used a Tayda Green sparkle enclosure. Inside I used Lumberg jacks and a green led. I chose a large 32mm knob and I used 1/2 inch white vinyl letters.
I like the Golden Fleece as well. Another one knobber I find it stacks well with, although it stacks well with almost anything, is the J’Tiame. 2 Electra style circuits stacked!