Deadend FX Shillelagh switch wiring question

[drgonzo1969]

I am wiring the switch on this Deadend FX Shillelagh but I am not sure which lugs are 4,5 and 6 on these DPDT stomp switches. 1,2 and 3 are labeled but the other side is blank. I didn’t see it in the data sheet but I will post link to that and build docs. Thanks for help.

https://www.taydaelectronics.com/datasheets/files/A-1868.pdf

Shillelagh build doc_opt.pdf

drive.google.com

 

[jwin615]

There's on 1723 combinations and the one you failed to try.
You've got this.
Gonna guess with no factual basis 123 are signal and 456 are led.
Probe it.

 

[jwin615]

Nope, looks like 4 is the out.
123 are LED?

 

[Feral Feline]

Uhm...?

Standard pole numbering for a DPDT is:

-1 4-
-2 5-
-3 6-


Did I miss something? 123 work the LED, and 456 routes the tone-shift — according to the BOM & Schematic in the build doc.
(Or you could wire the tone shift to 123, and the LED to 456.)

Wire it up, Chef!

 

[pingpongcomputer]

Have you tried wiring it based on the standard DEFX layout?

I would guess just the two rows of lugs in order since there's no 3rd row like on 3PDT.
Dino has answered my questions pretty quickly via email as well when I get stuck: [email protected]

 

[drgonzo1969]

I wired it up as @Feral Feline described. It works. Pretty killer pedal. Sounds like fz-2 or behringer super fuzz with options

 

[pingpongcomputer]

I wired it up as @Feral Feline described. It works. Pretty killer pedal. Sounds like fz-2 or behringer super fuzz with options

I just finished a DEFX EVA and have a hyped fuzz in the build queue. Now I guess I have to buy a Shillelagh board, build it, and do a shoot out.

 

[neiltheseal]

This thread has piqued my interest in this board. I looked at the schematic and found this.

Can someone please tell me what's going on here with SW1?

What are Q5 and Q6 doing here?

 

[PedalBuilder]

It’s R.G. Keen’s Millennium Bypass, which lets you do true bypass with a DPDT.

 

[neiltheseal]

It’s R.G. Keen’s Millennium Bypass, which lets you do true bypass with a DPDT.

Ahh that makes sense. Thanks so much!