PangeaDestructor
Active member
I have a functional pedalpcb DOD250 without the diodes, and I'm trying to wire this (https://drive.google.com/file/d/1YSbrA-hZEN5xtWxdzNkJDVAUvD-Z9BPc/view) into the circuit. I can't see the traces on the 250 board, and the silkscreen just lists the suggested 1n270 diode, so I'm having a hard time figuring out where to wire it in. Looking at the 250 schematic, I'm thinking it should go into both pads for the lower 1n270, no idea which one should get the + vs. - wire, but i'm hoping for confirmation before i solder it in. Thanks in advance.