Duocast oc71 pinout help

Rcmatz

Member
I've got a duocast w an oc71 in works. Purchased from tubedepot.

I see some Google info that implies the pins, progressing away from the silver mark in order are
Pin 1 Collector
Pin 2 Emitter
Pin 3 Base


Does anyone have experience w these?


W multimeter my measurements are
Pin 1 and 2.... 215
Pin 2 and 3.... 224
Pin 1 and 3.... Nothing

I think this means it is actually
Pin 1 collector
Pin 2 base
Pin E emitter

Appreciate any advice
 

Attachments

  • 20221120_092553.jpg
    20221120_092553.jpg
    394.2 KB · Views: 14
 
I have some of these on my bench, I'll check one today but I do believe CBE is correct.

If your DMM has a diode test function it's fairly easy.

Determine which lead is the base then measure the forward voltage drop between the base and each of the other two leads. The lead with the highest forward voltage drop is the emitter.
 
Thanks all!

Mine has a silver dot on the right that you can see in the picture.

Music6000 - I appreciate the first post you sent, that was going to be my follow-on question!

Homebrewtj do you have a link?

Thanks again

Randy
 
Thanks all!

Mine has a silver dot on the right that you can see in the picture.

Music6000 - I appreciate the first post you sent, that was going to be my follow-on question!

Homebrewtj do you have a link?

Thanks again

Randy

Treedix LCR-T4 Mega328 Graphical Transistor Tester Kit SCR ESR Transistor Diode Resistance and Capacitance Meters with Battery Buckle and Acrylic Case https://a.co/d/d7FwtLb
 
Back
Top Bottom