DEMO EchoFlangingPolyChorus (LectricFX Dandy Horse)

This post contains an audio or video demo

DGWVI

Well-known member
Build Rating
5.00 star(s)
Another commission - this time LectricFX's take on the original EchoFlanger PolyChorus multi BBD box.
Got lucky with this one- it needed very minimal calibrating. I do need to mess with the fdbk trim a bit more, I gave it a little too much berth, but otherwise I'm happy


1000018556.jpg 1000018557.jpg


It's sort of a lot of parts, but I wouldn't call it difficult to assemble by any means. The hardest bit is usually the calibrating, but Lectric includes some excellent instructions for tuning it without an OScope. If you're a fan of EHX's 70s wackiness or BBD circuits that can go from subtle to maddening, this one's for you


I've got another of these on the bench that I'll be tinkering with a bit before boxing.
 
Good job. Having built this, it's only good for In Utero sounds, but Brian teased a version that has a layout with less off board wiring that I really wanna build.

I had to stop myself when I almost stumbled on the RFUS intro tone in the demo :ROFLMAO:

I haven't seen that teaser, but there's really not a whole lot of off board wires to worry about.
 
Last edited:
I had to stop myself in the demo when I almost stumbled on the RFUS intro tone in the demo :ROFLMAO:

I haven't seen that teaser, but there's really not a whole lot of off board wires to worry about.
The traces for the jacks are at the top of the board, the means no long wires across the board from the footswitch to the jacks that can potentially pickup noise.
 
Back
Top