First Tayda UV print - failed

[jcpst]

I thought I would try a UV print. The only problem is I don’t know what I’m doing . Graphic design tools are very foreign to me.

I followed along with the Pachyderm Pedals guide, but I must have messed up somewhere.

- Artwork is wrong size

If anyone was willing to look at the attachment and tell me what is wrong, that would be great.

 

[Nic]

What is the size of your artwork in "mm" ? From your file information it's oversized at :
For a 125B : artboard size 62 x 117mm
Yours would be about : 258 x 487mm.

 

[jcpst]

Thank you for helping me with something so basic and trivial.

 

[Audandash]

If you are using illustrator I promise it does get easier. I learned early on if you have illustrator on the iPad it is much easier to do what we need. It doesn't have as many features but it gets rid of a lot of stuff that makes the full blown version a little overwhelming. I use my iPad for all enclosure designs now. The only trade off is I have never figured out how to get the white loaded properly in the ipad version. I do pull up my final work on my mac and change the white before i finalize it. Because everything is saved on the adobe cloud it allows you to jump back and forth between the iPad version and mac/pc version easily. I have templates saved with tayda drill markings as well so it makes it super easy for designs. If you have questions about it I am happy to help with what I have learned.