rjkuyvenhoven
New member
Tested my completed FV-1 Dev Board for the first time and I'm not getting any effect on the audio. The dry sound is passing thru fine. Mix knob turned full left I get full dry signal, when turned full right I get nothing.
I've tried it with the Spatialist and Module8 eeproms, no luck with either.
Using an audio probe I get audio on pins 1 & 2 of the FV-1 but nothing on Pin 28
I'm getting 3.3v on pins 6, 8, 23 of the FV-1 and 3.3v on pin 8 of the eeprom.
What would be a good next step to test?
Thanks.
I've tried it with the Spatialist and Module8 eeproms, no luck with either.
Using an audio probe I get audio on pins 1 & 2 of the FV-1 but nothing on Pin 28
I'm getting 3.3v on pins 6, 8, 23 of the FV-1 and 3.3v on pin 8 of the eeprom.
What would be a good next step to test?
Thanks.