spi
Well-known member
I had high expectations for this pedal given I like MIABs and several people here sing its praises. So far it doesn't disappoint.
I used j201s, except for Q3 where there's an out-of-spec 2n5457 (following ChuckDBone's advice to ensure it has higher ISS than Q4).
Kudos to Robert for putting test pads with the target voltages printed on the PCB, which made dialing in the biasing a breeze.
I used j201s, except for Q3 where there's an out-of-spec 2n5457 (following ChuckDBone's advice to ensure it has higher ISS than Q4).
Kudos to Robert for putting test pads with the target voltages printed on the PCB, which made dialing in the biasing a breeze.
