Guitar Pickup Simulator KiCAD transformer question

[Song Naga]

Hi all, I'm putting together a guitar pickup simulator based on this:

Guitar Pickups Simulation

Schematics & circuits for guitar effects with vacuum tubes and solid state electronics. FREE downloads of schematics such as TS-9, Fuzz Face and other classic rock devices.

www.muzique.com

I'm not sure about the transformer and its connections. In KiCAD, I've selected a "Transformer_1P_1S" symbol and dropped it in as best I could, here's the schematic:



Did I do it right? Do I need a different transformer symbol? Thanks for your input!

 

[szukalski]

The symbol is pretty much irrelevant. What’s important is the footprint matches the part you will use.

 

[Song Naga]

I've made an attempt at adding switching and an LED to the schematic, can anyone tell me if they're put together correctly? Pulled the switch, LED and battery bits from the A/B/Y pedal schematic. Thanks for any input!

 

[Feral Feline]

You're not applying power to any part of the circuit, save for the LED-Bypass-Indicator itself — so save yourself a few pennies by ditching D2-1N5817 and C3-10µ from the build.
*(ie, you don't need polarity protection nor power-filtering for just lighting up an LED.)