Help wiring two boards together slightly differently

[FamousAmos]

I'm planning out a booster/buffer/splitter pedal and need some help making sure I'm wiring and grounding everything properly.

Basically I want the booster (Cleaver) to come first and to be switchable (on/off) via the footswitch. Then I want to go out from the Cleaver to the buffer/splitter (Spluffer). The buffer/splitter however I want to be always on and not affected by the footswitch.

Am I on the right track? I'm not sure that I have the grounding right on the connection between the two boards as there's some open ground pads I'm really not sure what to do with. Help please lol. Attached is my wiring attempt. Blank canvas also attached to correct me.

 

[genXslacker]

That should work. The ground wires to the output jacks shouldn't be necessary if the jacks are making good contact with the bare aluminum of the enclosure, but they're not going to hurt anything either. It's a belt-and-suspenders thing.