Help with components

[mandolintom88]

Hello,
I am having a hard time finding the 2 voltage regulators for the ProtoBoard build. The link in the build doc to Mouser are sold out. Same with the Poly resettable fuse as well. I found this https://www.taydaelectronics.com/poly-switch-resettable-mfr-series-30v-1-85-a.html I am guessing it will work fine. The only thing I need are the two voltage regulators if so.

Thanks in advance for the help!

Thomas

 

[Harry Klippton]

I got them from @fig

 

[fig]

I have the 5v, and some 3.3v on order (I think I'm out but will look). The board will function without them but it's nice to have those voltages handy. Send me your address in a PM and I'll mail it / them to you.

 

[spi]

From Tayda you can use this for the 5V regulator:

LM1117 LM1117MPX 5.0V 800mA Low-Dropout Linear Voltage Regulator

NATIONAL - Get It Fast - Same Day Shipping

www.taydaelectronics.com

And the fuse you linked to works.

 

[szukalski]

Which continent are you based in?

 

[mandolintom88]

Which continent are you based in?

North America. US to be specific.

 

[szukalski]

North America. US to be specific.

Sorry mate, can’t help there. If you were in Europe I could recommend some retailers but I doubt they ship across the pond.

 

[Laundryroom David]

Hello,
I am having a hard time finding the 2 voltage regulators for the ProtoBoard build. The link in the build doc to Mouser are sold out. Same with the Poly resettable fuse as well. I found this https://www.taydaelectronics.com/poly-switch-resettable-mfr-series-30v-1-85-a.html I am guessing it will work fine. The only thing I need are the two voltage regulators if so.

Thanks in advance for the help!

Thomas

I’m in Canada. Same problems. If you find these voltage regulators available anywhere pls post to list?

 

[Fizz]

After posting a thread here with the same question I bought these two from Tayda:

LM1117 LM1117MPX 5.0V 800mA Low-Dropout Linear Voltage Regulator

NATIONAL - Get It Fast - Same Day Shipping

www.taydaelectronics.com

AP1084D33G AP1084 LDO Voltage Regulator IC 3.3V 5A

DIODES INCORPORATED - Get It Fast - Same Day Shipping

www.taydaelectronics.com

Here is the thread:

Where to get LD1117S50 5V LDO Voltage Regulator for my PedalPCB Protoboard?

Looks like I have everything I need on order to complete my PedalPCB Protoboard build but I can't find the LD1117S50 5V LDO Regulator. Any got a link to one? Also, will this work for the 3.3V Regulator for the build or should I stick to the one at Mouser that is linked to in the build...

forum.pedalpcb.com

 

[Phil hodson]

I’m in Canada and got mine from “pcboard”
I haven’t actually used them yet as I have only used 9V so far.
They came In a 5 pack so I have spares if anyone needs them. I’m happy to post them out to people.
Drop me a PM and let me know if I can help.
Phil