In search of Stereo Reverbs and Delays to fill 2 Binaura EEPROMS.

BrainGutz said:
This one is great! Feels very useful as well. You can almost get a rotary delay effect with it at higher speeds! Mark this one done.
Click to expand...
Cool beans! Here's D06 . . .
Stereo-wise, this one seems a bit weak to me. But that just might be the fact that the two Reverse Delay blocks have a fixed delay rate and can't be changed. Maybe in SpinASM, but that's over my head for now. You may want to temporarily add the "2:2 (x2) Mixer" to hear how it sounds with a dry signal.

D06 Stereo Reverse Delay.spcdj
JSON: 
{
  "formatVersion": 1,
  "buildNumber": 1070,
  "type": "patch",
  "patchFileName": "D06 Stereo Reverse Delay.spcdj",
  "comments": {
    "fileName": "D06 Stereo Reverse Delay.spcdj",
    "version": "Patch saved from SpinCAD Designer version 1070",
    "lines": [
      "Pot 0: Feedback/Repeats Left" (Up to 500ms),
      "Pot 1: Feedback/Repeats Right"(Up to 500ms),
      "Pot 2: not used",
      "Dual reverse delay buffer grains alternating between Left and Right outputs.",
      "Part of a Pedal PCB Community project."
    ]
  },
  "potValues": [
    88.0,
    79.0,
    0.0
  ],
  "blocks": [
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.InputCADBlock",
      "blockNum": 0,
      "x": 202,
      "y": 5,
      "name": "Input"
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.FBOutputCADBlock",
      "blockNum": 1,
      "x": 85,
      "y": 69,
      "name": "FB Out 1",
      "params": {
        "register": 33
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.Pot0CADBlock",
      "blockNum": 2,
      "x": 22,
      "y": 138,
      "name": "Pot 0",
      "params": {
        "speedup": false,
        "potRegister": 16
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.Pot1CADBlock",
      "blockNum": 3,
      "x": 23,
      "y": 211,
      "name": "Pot 1",
      "params": {
        "speedup": false,
        "potRegister": 17
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.ReverseDelayCADBlock",
      "blockNum": 4,
      "x": 95,
      "y": 138,
      "name": "Reverse Delay",
      "params": {
        "inputGain": 1.0,
        "fbkGain": 0.7079457843841379,
        "memMode": 0.0,
        "delayLen": 16383.0,
        "phase1": 34,
        "output": 35,
        "ramp": 36,
        "ramp2": 37,
        "xfade": 38,
        "xfade2": 39
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.FBOutputCADBlock",
      "blockNum": 5,
      "x": 326,
      "y": 110,
      "name": "FB Out 2",
      "params": {
        "register": 33
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.LPF_RDFXCADBlock",
      "blockNum": 6,
      "x": 150,
      "y": 222,
      "name": "LPF 1P",
      "params": {
        "freq": 0.218873958802294,
        "lpf1": 40
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.ReverseDelayCADBlock",
      "blockNum": 7,
      "x": 283,
      "y": 167,
      "name": "Reverse Delay",
      "params": {
        "inputGain": 1.0,
        "fbkGain": 0.7079457843841379,
        "memMode": 0.0,
        "delayLen": 16383.0,
        "phase1": 41,
        "output": 42,
        "ramp": 43,
        "ramp2": 44,
        "xfade": 45,
        "xfade2": 46
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.LPF_RDFXCADBlock",
      "blockNum": 8,
      "x": 319,
      "y": 221,
      "name": "LPF 1P",
      "params": {
        "freq": 0.17448479651402438,
        "lpf1": 47
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.OutputCADBlock",
      "blockNum": 9,
      "x": 183,
      "y": 427,
      "name": "Output",
      "params": {
        "mono": false,
        "offset0": false,
        "gain1": 1.0,
        "gain2": 1.0
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.FBInputCADBlock",
      "blockNum": 10,
      "x": 167,
      "y": 272,
      "name": "FB In 1",
      "params": {
        "register": 33,
        "lGain": 1.29
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.FBInputCADBlock",
      "blockNum": 11,
      "x": 319,
      "y": 276,
      "name": "FB In 2",
      "params": {
        "register": 33,
        "lGain": 1.27
      }
    }
  ],
  "connections": [
    {
      "fromBlockIndex": 0,
      "fromPin": "Output 1",
      "toBlockIndex": 4,
      "toPin": "Input"
    },
    {
      "fromBlockIndex": 1,
      "fromPin": "Feedback Output",
      "toBlockIndex": 4,
      "toPin": "Feedback"
    },
    {
      "fromBlockIndex": 2,
      "fromPin": "Control Output 1",
      "toBlockIndex": 4,
      "toPin": "Feedback Gain"
    },
    {
      "fromBlockIndex": 4,
      "fromPin": "Output",
      "toBlockIndex": 6,
      "toPin": "Input"
    },
    {
      "fromBlockIndex": 0,
      "fromPin": "Output 2",
      "toBlockIndex": 7,
      "toPin": "Input"
    },
    {
      "fromBlockIndex": 5,
      "fromPin": "Feedback Output",
      "toBlockIndex": 7,
      "toPin": "Feedback"
    },
    {
      "fromBlockIndex": 3,
      "fromPin": "Control Output 1",
      "toBlockIndex": 7,
      "toPin": "Feedback Gain"
    },
    {
      "fromBlockIndex": 7,
      "fromPin": "Output",
      "toBlockIndex": 8,
      "toPin": "Input"
    },
    {
      "fromBlockIndex": 4,
      "fromPin": "Output",
      "toBlockIndex": 9,
      "toPin": "Input 1"
    },
    {
      "fromBlockIndex": 7,
      "fromPin": "Output",
      "toBlockIndex": 9,
      "toPin": "Input 2"
    },
    {
      "fromBlockIndex": 6,
      "fromPin": "Output",
      "toBlockIndex": 10,
      "toPin": "Feedback Input"
    },
    {
      "fromBlockIndex": 8,
      "fromPin": "Output",
      "toBlockIndex": 11,
      "toPin": "Feedback Input"
    }
  ]
}
 
You must log in or register to reply here.
Back
Top