In search of Stereo Reverbs and Delays to fill 2 Binaura EEPROMS.

Alrighty then! I'm going to jump to R08 - 'Dual-Tank Stereo Spring Reverb' for now. R05 (Slow-Attack Auto-Volume Reverb), R06 (Diffuse Multi-Tap Tape Reverb) & R07 (Reverse-Envelope Gated Reverb) are all presenting a good bit of challenge for the time being. We might need to settle on using stereo versions of standard reverbs like room, hall, plate, spring, etc. for slots R05, R06 & R07.

So here are two candidates for R08 (Dual-Tank Stereo Spring Reverb). . . . .

This first one, in my opinion, is a bit janky for a spring reverb. It uses 3 double-tapped delay blocks to achieve the effect. And while it may be useable, I don't think it really fits the bill for a spring/tank verb effect. We can futz with the 3 different Delay blocks' Delay Time parameters (in their respective Control Panels) to get a better spring/tank effect. Still, you may find it useful.

The second one presented uses a 'Spring Reverb' designer block with both left & right inputs & outputs and only has two control pots. The 3rd pot is not used.

R08_Stereo_Tank_Reverb.spcdj
JSON: 
{
  "formatVersion": 1,
  "buildNumber": 1070,
  "type": "patch",
  "patchFileName": "R08_Stereo_Tank_Reverb.spcdj",
  "comments": {
    "fileName": "R08_Stereo_Tank_Reverb.spcdj",
    "version": "Patch saved from SpinCAD Designer version 1070",
    "lines": [
      "Pot 0: Reverb Time",
      "Pot 1: Feedback",
      "Pot 2: Feedback Filter",
      "",
      "R08_Stereo_Tank_Reverb.spcdj"
    ]
  },
  "potValues": [
    0.0,
    0.0,
    0.0
  ],
  "blocks": [
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.InputCADBlock",
      "blockNum": 0,
      "x": 319,
      "y": 2,
      "name": "Input"
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.Pot0CADBlock",
      "blockNum": 1,
      "x": 42,
      "y": 89,
      "name": "Pot 0",
      "params": {
        "speedup": false,
        "potRegister": 16
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.ScaleOffsetControlCADBlock",
      "blockNum": 2,
      "x": 104,
      "y": 89,
      "name": "Scale/Offset",
      "params": {
        "inLow": 0.0,
        "inHigh": 1.0,
        "outLow": 0.36,
        "outHigh": 1.0
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.control_smootherCADBlock",
      "blockNum": 3,
      "x": 202,
      "y": 89,
      "name": "Smoother",
      "params": {
        "filtReg": 34,
        "filt": 0.0028321367257876373
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.FBOutputCADBlock",
      "blockNum": 4,
      "x": 575,
      "y": 27,
      "name": "FB Out 1",
      "params": {
        "register": 37
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.Pot1CADBlock",
      "blockNum": 5,
      "x": 40,
      "y": 303,
      "name": "Pot 1",
      "params": {
        "speedup": false,
        "potRegister": 17
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.FBOutputCADBlock",
      "blockNum": 6,
      "x": 475,
      "y": 168,
      "name": "FB Out 2",
      "params": {
        "register": 37
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.FBOutputCADBlock",
      "blockNum": 7,
      "x": 216,
      "y": 199,
      "name": "FB Out 3",
      "params": {
        "register": 37
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.ScaleOffsetControlCADBlock",
      "blockNum": 8,
      "x": 102,
      "y": 304,
      "name": "Scale/Offset",
      "params": {
        "inLow": 0.0,
        "inHigh": 1.0,
        "outLow": 0.42,
        "outHigh": 1.0
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.TripleTapCADBlock",
      "blockNum": 9,
      "x": 403,
      "y": 210,
      "name": "ThreeTap",
      "params": {
        "inputGain": 1.0,
        "fbkGain": 0.8912509381337456,
        "delayLength": 6472.0,
        "tap1Ratio": 1.0,
        "tap2Ratio": 0.4206666666666667,
        "tap3Ratio": 0.0,
        "subdivision": 0.0,
        "delayOffset": -1.0,
        "output1": 39,
        "output2": 40,
        "output3": 0
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.Pot2CADBlock",
      "blockNum": 10,
      "x": 41,
      "y": 458,
      "name": "Pot 2",
      "params": {
        "speedup": false,
        "potRegister": 18
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.TripleTapCADBlock",
      "blockNum": 11,
      "x": 324,
      "y": 282,
      "name": "ThreeTap",
      "params": {
        "inputGain": 1.0,
        "fbkGain": 0.8912509381337456,
        "delayLength": 8091.0,
        "tap1Ratio": 1.0,
        "tap2Ratio": 0.6525,
        "tap3Ratio": 0.0,
        "subdivision": 0.0,
        "delayOffset": -1.0,
        "output1": 41,
        "output2": 42,
        "output3": 0
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.ScaleOffsetControlCADBlock",
      "blockNum": 12,
      "x": 104,
      "y": 458,
      "name": "Scale/Offset",
      "params": {
        "inLow": 0.0,
        "inHigh": 1.0,
        "outLow": 0.24,
        "outHigh": 0.8
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.LPF_RDFXCADBlock",
      "blockNum": 13,
      "x": 603,
      "y": 328,
      "name": "LPF 1P",
      "params": {
        "freq": 0.5095391792541264,
        "lpf1": 44
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.FBInputCADBlock",
      "blockNum": 14,
      "x": 603,
      "y": 382,
      "name": "FB In 2",
      "params": {
        "register": 37,
        "lGain": 1.0
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.TripleTapCADBlock",
      "blockNum": 15,
      "x": 554,
      "y": 89,
      "name": "ThreeTap",
      "params": {
        "inputGain": 1.0,
        "fbkGain": 0.8912509381337456,
        "delayLength": 5057.0,
        "tap1Ratio": 1.0,
        "tap2Ratio": 0.189,
        "tap3Ratio": 0.0,
        "subdivision": 0.0,
        "delayOffset": -1.0,
        "output1": 45,
        "output2": 46,
        "output3": 0
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.LPF_RDFXCADBlock",
      "blockNum": 16,
      "x": 602,
      "y": 227,
      "name": "LPF 1P",
      "params": {
        "freq": 0.5095391792541264,
        "lpf1": 47
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.FBInputCADBlock",
      "blockNum": 17,
      "x": 602,
      "y": 279,
      "name": "FB In 1",
      "params": {
        "register": 37,
        "lGain": 1.0
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.LPF_RDFXCADBlock",
      "blockNum": 18,
      "x": 613,
      "y": 467,
      "name": "LPF 1P",
      "params": {
        "freq": 0.5095391792541264,
        "lpf1": 48
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.FBInputCADBlock",
      "blockNum": 19,
      "x": 613,
      "y": 520,
      "name": "FB In 3",
      "params": {
        "register": 37,
        "lGain": 1.0
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.Mixer_3_to_1CADBlock",
      "blockNum": 20,
      "x": 341,
      "y": 421,
      "name": "Mixer 3:1",
      "params": {
        "gain1": 1.0,
        "gain2": 1.0,
        "gain3": 1.0,
        "output": 49
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.Mixer_3_to_1CADBlock",
      "blockNum": 21,
      "x": 436,
      "y": 418,
      "name": "Mixer 3:1",
      "params": {
        "gain1": 1.0,
        "gain2": 1.0,
        "gain3": 1.0,
        "output": 50
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.OutputCADBlock",
      "blockNum": 22,
      "x": 377,
      "y": 500,
      "name": "Output",
      "params": {
        "mono": true,
        "offset0": false,
        "gain1": 1.0,
        "gain2": 0.35481338923357547
      }
    }
  ],
  "connections": [
    {
      "fromBlockIndex": 1,
      "fromPin": "Control Output 1",
      "toBlockIndex": 2,
      "toPin": "Control Input 1"
    },
    {
      "fromBlockIndex": 2,
      "fromPin": "Control Output 1",
      "toBlockIndex": 3,
      "toPin": "Control Input"
    },
    {
      "fromBlockIndex": 5,
      "fromPin": "Control Output 1",
      "toBlockIndex": 8,
      "toPin": "Control Input 1"
    },
    {
      "fromBlockIndex": 0,
      "fromPin": "Output 1",
      "toBlockIndex": 9,
      "toPin": "Input"
    },
    {
      "fromBlockIndex": 6,
      "fromPin": "Feedback Output",
      "toBlockIndex": 9,
      "toPin": "Feedback"
    },
    {
      "fromBlockIndex": 3,
      "fromPin": "Control Output",
      "toBlockIndex": 9,
      "toPin": "Delay Time 1"
    },
    {
      "fromBlockIndex": 8,
      "fromPin": "Control Output 1",
      "toBlockIndex": 9,
      "toPin": "Feedback Gain"
    },
    {
      "fromBlockIndex": 0,
      "fromPin": "Output 1",
      "toBlockIndex": 11,
      "toPin": "Input"
    },
    {
      "fromBlockIndex": 7,
      "fromPin": "Feedback Output",
      "toBlockIndex": 11,
      "toPin": "Feedback"
    },
    {
      "fromBlockIndex": 3,
      "fromPin": "Control Output",
      "toBlockIndex": 11,
      "toPin": "Delay Time 1"
    },
    {
      "fromBlockIndex": 8,
      "fromPin": "Control Output 1",
      "toBlockIndex": 11,
      "toPin": "Feedback Gain"
    },
    {
      "fromBlockIndex": 10,
      "fromPin": "Control Output 1",
      "toBlockIndex": 12,
      "toPin": "Control Input 1"
    },
    {
      "fromBlockIndex": 9,
      "fromPin": "Tap 1 Out",
      "toBlockIndex": 13,
      "toPin": "Input"
    },
    {
      "fromBlockIndex": 12,
      "fromPin": "Control Output 1",
      "toBlockIndex": 13,
      "toPin": "Frequency"
    },
    {
      "fromBlockIndex": 13,
      "fromPin": "Output",
      "toBlockIndex": 14,
      "toPin": "Feedback Input"
    },
    {
      "fromBlockIndex": 0,
      "fromPin": "Output 2",
      "toBlockIndex": 15,
      "toPin": "Input"
    },
    {
      "fromBlockIndex": 4,
      "fromPin": "Feedback Output",
      "toBlockIndex": 15,
      "toPin": "Feedback"
    },
    {
      "fromBlockIndex": 3,
      "fromPin": "Control Output",
      "toBlockIndex": 15,
      "toPin": "Delay Time 1"
    },
    {
      "fromBlockIndex": 8,
      "fromPin": "Control Output 1",
      "toBlockIndex": 15,
      "toPin": "Feedback Gain"
    },
    {
      "fromBlockIndex": 15,
      "fromPin": "Tap 1 Out",
      "toBlockIndex": 16,
      "toPin": "Input"
    },
    {
      "fromBlockIndex": 12,
      "fromPin": "Control Output 1",
      "toBlockIndex": 16,
      "toPin": "Frequency"
    },
    {
      "fromBlockIndex": 16,
      "fromPin": "Output",
      "toBlockIndex": 17,
      "toPin": "Feedback Input"
    },
    {
      "fromBlockIndex": 11,
      "fromPin": "Tap 1 Out",
      "toBlockIndex": 18,
      "toPin": "Input"
    },
    {
      "fromBlockIndex": 12,
      "fromPin": "Control Output 1",
      "toBlockIndex": 18,
      "toPin": "Frequency"
    },
    {
      "fromBlockIndex": 18,
      "fromPin": "Output",
      "toBlockIndex": 19,
      "toPin": "Feedback Input"
    },
    {
      "fromBlockIndex": 11,
      "fromPin": "Tap 1 Out",
      "toBlockIndex": 20,
      "toPin": "Input 1"
    },
    {
      "fromBlockIndex": 9,
      "fromPin": "Tap 1 Out",
      "toBlockIndex": 20,
      "toPin": "Input 2"
    },
    {
      "fromBlockIndex": 15,
      "fromPin": "Tap 1 Out",
      "toBlockIndex": 20,
      "toPin": "Input 3"
    },
    {
      "fromBlockIndex": 11,
      "fromPin": "Tap 2 Out",
      "toBlockIndex": 21,
      "toPin": "Input 1"
    },
    {
      "fromBlockIndex": 9,
      "fromPin": "Tap 2 Out",
      "toBlockIndex": 21,
      "toPin": "Input 2"
    },
    {
      "fromBlockIndex": 15,
      "fromPin": "Tap 2 Out",
      "toBlockIndex": 21,
      "toPin": "Input 3"
    },
    {
      "fromBlockIndex": 20,
      "fromPin": "Output",
      "toBlockIndex": 22,
      "toPin": "Input 1"
    },
    {
      "fromBlockIndex": 21,
      "fromPin": "Output",
      "toBlockIndex": 22,
      "toPin": "Input 2"
    }
  ]
}

R08_Stereo_Tank_Reverb_02.spcdj
JSON: 
{
  "formatVersion": 1,
  "buildNumber": 1070,
  "type": "patch",
  "patchFileName": "R08_Stereo_Tank_Reverb_02.spcdj",
  "comments": {
    "fileName": "R08_Stereo_Tank_Reverb.spcdj",
    "version": "Patch saved from SpinCAD Designer version 1070",
    "lines": [
      "Pot 0: Reverb Time",
      "Pot 1: Damping (Reverb Depth)",
      "Pot 2: not used",
      "",
      "R08_Stereo_Tank_Reverb_02"
    ]
  },
  "potValues": [
    98.0,
    99.0,
    1.0
  ],
  "blocks": [
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.InputCADBlock",
      "blockNum": 0,
      "x": 256,
      "y": 55,
      "name": "Input"
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.Pot0CADBlock",
      "blockNum": 1,
      "x": 4,
      "y": 111,
      "name": "Pot 0",
      "params": {
        "speedup": false,
        "potRegister": 16
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.ScaleOffsetControlCADBlock",
      "blockNum": 2,
      "x": 67,
      "y": 111,
      "name": "Scale/Offset",
      "params": {
        "inLow": 0.0,
        "inHigh": 1.0,
        "outLow": 0.44,
        "outHigh": 1.0
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.control_smootherCADBlock",
      "blockNum": 3,
      "x": 165,
      "y": 111,
      "name": "Smoother",
      "params": {
        "filtReg": 34,
        "filt": 0.0028321367257876373
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.Pot1CADBlock",
      "blockNum": 4,
      "x": 86,
      "y": 160,
      "name": "Pot 1",
      "params": {
        "speedup": false,
        "potRegister": 17
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.ScaleOffsetControlCADBlock",
      "blockNum": 5,
      "x": 148,
      "y": 160,
      "name": "Scale/Offset",
      "params": {
        "inLow": 0.0,
        "inHigh": 1.0,
        "outLow": 0.42,
        "outHigh": 1.0
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.SpringReverbCADBlock",
      "blockNum": 6,
      "x": 256,
      "y": 111,
      "name": "Spring_Reverb",
      "params": {
        "gain": 0.5,
        "krt": 0.95,
        "krf": 0.7,
        "klap": 0.6,
        "kap0": -0.7,
        "kap1": -0.65,
        "kap2": -0.6,
        "kap3": -0.5,
        "baselen1": 4.0,
        "baselen2": 7.0,
        "outputL": 36,
        "outputR": 37,
        "lp1": 38,
        "lp2": 39,
        "temp": 40
      }
    },
    {
      "className": "com.holycityaudio.SpinCAD.CADBlocks.OutputCADBlock",
      "blockNum": 7,
      "x": 256,
      "y": 167,
      "name": "Output",
      "params": {
        "mono": true,
        "offset0": false,
        "gain1": 1.0,
        "gain2": 0.35481338923357547
      }
    }
  ],
  "connections": [
    {
      "fromBlockIndex": 1,
      "fromPin": "Control Output 1",
      "toBlockIndex": 2,
      "toPin": "Control Input 1"
    },
    {
      "fromBlockIndex": 2,
      "fromPin": "Control Output 1",
      "toBlockIndex": 3,
      "toPin": "Control Input"
    },
    {
      "fromBlockIndex": 4,
      "fromPin": "Control Output 1",
      "toBlockIndex": 5,
      "toPin": "Control Input 1"
    },
    {
      "fromBlockIndex": 0,
      "fromPin": "Output 1",
      "toBlockIndex": 6,
      "toPin": "Input_L"
    },
    {
      "fromBlockIndex": 0,
      "fromPin": "Output 2",
      "toBlockIndex": 6,
      "toPin": "Input_R"
    },
    {
      "fromBlockIndex": 3,
      "fromPin": "Control Output",
      "toBlockIndex": 6,
      "toPin": "Reverb_Time"
    },
    {
      "fromBlockIndex": 5,
      "fromPin": "Control Output 1",
      "toBlockIndex": 6,
      "toPin": "Damping"
    },
    {
      "fromBlockIndex": 6,
      "fromPin": "OutputL",
      "toBlockIndex": 7,
      "toPin": "Input 1"
    },
    {
      "fromBlockIndex": 6,
      "fromPin": "OutputR",
      "toBlockIndex": 7,
      "toPin": "Input 2"
    }
  ]
}
 
You must log in or register to reply here.
Back
Top