DEMO Is it too early to get ready for Christmas?

This post contains an audio or video demo

Pauleo1214

Well-known member
This hideous pedal is a combo build featuring the Parasit Studio Into the Unknown with a CV Generator to control the LFO.

This was a frustrating build. The boards are straight forward builds. The Into the Unknown kinked out. I'm the name is apropos because it describes the 8 hours I spent trying to debug it. I replaced all the chips, tested all the traces for continuity, but no dice. It was extremely frustrating as it worked perfectly at the start.

After the eight hours, I ordered another Into the Unknown. 30 minutes after it arrived, I got the new board populated and the build completed. Because of the number of LEDs, I painted the enclosure green and used spare knobs to make it look it like a Christmas Tree. It's a light show, hence the epilepsy joke.

The CV generator controls only the LFO on the circuit and only shines through on particular settings. Otherwise, I can't really recommend putting it all in one enclosure.

A huge thanks to @DGWVI for advising on the Into the Unknown settings and for
Having the patience to help me attempt debugging the first board.

20231019_231515.jpg

20231019_231528.jpg
 
Best named pedal I've seen yet :ROFLMAO:
Hoping epilepsy jokes are ok here. This thing has as many flashing lights as a Christmas tree.
Also your drilling is killer, so many holes so close together. Tell me you did it by hand.
I drill my enclosures by hand, I'm too lazy to set up the drill press most days. I measure out where the holes are, use a hammer and a punch to make indents so the drill bit won't slide.
 
Back
Top