Elktronics
Active member
Hello, I’m having some issues with this build. The volume seems low, and there is way too much bass. Other tone controls work, but don’t add much.
My voltages seem consistent, but may be wrong. For the 9.1 volt diode I used 1N4739A
As you look at the board, the bs170 in the top left gives me the following voltages (from left to right)
5.81
2.76
3.32
The bs170 in the top right gives me the following readings
5.66
2.77
3.47
The lower middle bs170 gives me
5.75
2.75
3.37
Any clues as to whether these voltages are correct?
Thank you!
My voltages seem consistent, but may be wrong. For the 9.1 volt diode I used 1N4739A
As you look at the board, the bs170 in the top left gives me the following voltages (from left to right)
5.81
2.76
3.32
The bs170 in the top right gives me the following readings
5.66
2.77
3.47
The lower middle bs170 gives me
5.75
2.75
3.37
Any clues as to whether these voltages are correct?
Thank you!