Jacks for Protoboard Micro

[mybud]

Greetings collective wisdom.

I’d appreciate some advice on the correct jacks for this (with Mouser part numbers if possible). There’s quite a variety on offer, so just want to ensure I order the best one for the job.

Thanks in advance.

 

[Robert]

NMJ6HFD2 or NMJ6HCD2, your choice.

There's no reason you couldn't use the mono versions as well, I just use stereo for the added pins / extra support.

https://www.mouser.com/ProductDetail/Neutrik/NMJ6HCD2?qs=ZNZTMDotSRlKYl2qFVJbQA%3D%3D

https://www.mouser.com/ProductDetail/Neutrik/NMJ6HFD2?qs=y5MlCMoPWsng3r9W7xlRqw%3D%3D

6.35mm 1/4" Stereo Insulated Unswitched Socket Jack PCB Pins

Get It Fast - Same Day Shipping

www.taydaelectronics.com

6.35mm 1/4" Stereo Insulated Switched Socket Jack PCB

Get It Fast - Same Day Shipping

www.taydaelectronics.com

 

[mybud]

NMJ6HFD2 or NMJ6HCD2, your choice.

There's no reason you couldn't use the mono versions as well, I just use stereo for the added pins / extra support.

https://www.mouser.com/ProductDetail/Neutrik/NMJ6HCD2?qs=ZNZTMDotSRlKYl2qFVJbQA%3D%3D

https://www.mouser.com/ProductDetail/Neutrik/NMJ6HFD2?qs=y5MlCMoPWsng3r9W7xlRqw%3D%3D

6.35mm 1/4" Stereo Insulated Unswitched Socket Jack PCB Pins

Get It Fast - Same Day Shipping

www.taydaelectronics.com

6.35mm 1/4" Stereo Insulated Switched Socket Jack PCB

Get It Fast - Same Day Shipping

www.taydaelectronics.com

Thank you kindly, @Robert.