JHS VCR (VHS)

knappster

Active member
Build Rating
3.00 star(s)
IMG_20240824_154004_624.jpg IMG_20240824_143303_009.jpg
Well this was an pretty easy build that I made more complicated. I pressed out the LED spots on the PCB so I had to wire the LED thru the SW and left side of the resistor. Which now I know you can do lol

The reverb at about 1o'clock sounds like a spacey delay. Not sure if that's normal. The pedal has a large noise floor. You can still get some decent sounds with it but I personally don't like this pedal. Not advanced enough to do mods or if they are any. I had the fv-1 done by pedalpcb.

I did the graphic with sticky paper as I had no waterslides with white background available. So they are marks and scratches all over. I added the washers to the switches because I scratched it all up taking it apart over and over lol. I did clear coat it several times but it still scratches easy. I do like the graphic I made however.

I'm not sure how the original sounds but I have read the noise floor is common. The spacey reverb however I don't think is.
 
The scratches and marks fit with the 70s/80s feel, I think (at least in the photos). Reminds me of my old Atari 2600.
 
Back
Top