let's see your pedalboard!

SillyOctpuss said:
So all your drive pedals must be on a seperate board all of own? You do have a mountain of drive pedals don't you?
Click to expand...
Yep. Got a whole stack of them… propping my bedroom door open 😜. In all seriousness, I’m an amp distortion guy and always have been. Nothing wrong with dirt pedals but, it’s just not my cup of tea. I like an amp for what it is and want to hear its true character. However, I have to admit that there’s some hypocrisy in that statement. I built a Guv’nor that I use in front of my 5f1 clone to make it sound more like a Marshall. That is actually the only drive pedal I own. Also, in my defense… I quite regularly crank the hell out of the champ and just let her breathe.

and it sounds glorious.
 
blackhatboojum said:
Yep. Got a whole stack of them… propping my bedroom door open 😜. In all seriousness, I’m an amp distortion guy and always have been. Nothing wrong with dirt pedals but, it’s just not my cup of tea. I like an amp for what it is and want to hear its true character. However, I have to admit that there’s some hypocrisy in that statement. I built a Guv’nor that I use in front of my 5f1 clone to make it sound more like a Marshall. That is actually the only drive pedal I own. Also, in my defense… I quite regularly crank the hell out of the champ and just let her breathe.

and it sounds glorious.
Click to expand...

But.... But.... drive pedals.... what would life be without yats?
 
Man there’s some amazing boards on here!!!

I never really like pedal boards…
I always have too many pedals and like different orders since I love experiementing…
But I did finally make a board for a project I’ve got going…
Still working on an all pedalpcb board…
 

Attachments

  • 31286C10-E512-4BD9-B2AD-76389DCE6671.jpeg
    31286C10-E512-4BD9-B2AD-76389DCE6671.jpeg
    934.3 KB · Views: 72
K Pedals said:
Man there’s some amazing boards on here!!!

I never really like pedal boards…
I always have too many pedals and like different orders since I love experiementing…
But I did finally make a board for a project I’ve got going…
Still working on an all pedalpcb board…
Click to expand...
Nice, this is one hell of a board!
 
CFF6B923-247B-47CE-A238-F3C2FDBD0E65.jpeg
I think I’m done! I need to finalise power and cabling still but happy with this for now.

Now I can just play guitar and never obsess about circuits again and just be happy…

Signal goes Polytune > Twinface/Aft > MKI Tonebender > Octa Fuzz > Electrovibe > Special OD > Parthenon > Lone King > Duocast > Klone > Low Tide > Caesar > Arachnida (Dual Arachnid) > Hydra > Carbon Copy > Quaverato > Trelicopter > HOF > Ditto.
 
JamieJ said:
View attachment 16451
I think I’m done! I need to finalise power and cabling still but happy with this for now.

Now I can just play guitar and never obsess about circuits again and just be happy…

Signal goes Polytune > Twinface/Aft > MKI Tonebender > Octa Fuzz > Electrovibe > Special OD > Parthenon > Lone King > Duocast > Klone > Low Tide > Caesar > Arachnida (Dual Arachnid) > Hydra > Carbon Copy > Quaverato > Trelicopter > HOF > Ditto.
Click to expand...
Thats a lot of pedals 🙃
 
  • Like
Reactions: fig
JamieJ said:
View attachment 16451
I think I’m done! I need to finalise power and cabling still but happy with this for now.

Now I can just play guitar and never obsess about circuits again and just be happy…

Signal goes Polytune > Twinface/Aft > MKI Tonebender > Octa Fuzz > Electrovibe > Special OD > Parthenon > Lone King > Duocast > Klone > Low Tide > Caesar > Arachnida (Dual Arachnid) > Hydra > Carbon Copy > Quaverato > Trelicopter > HOF > Ditto.
Click to expand...
I see a Centura. Did you build that, buy it used, or did you have the folks at Ceriatone build it for you?
 
blackhatboojum said:
I see a Centura. Did you build that, buy it used, or did you have the folks at Ceriatone build it for you?
Click to expand...
It’s a PedalPCB klone in a klon enclosure I got from aliexpress.

There’s a link to where I got the enclosure in this build report:

Obnoxious KLONe

I have always been a massive klon fan boy and love both the look and sound of the original. I built one ages ago from FuzzDog but accidentally fried it by putting 18v into. It was the first pedal I built and didn’t know how to find out what was wrong, so it went in the bin (wish I had kept it...
forum.pedalpcb.com forum.pedalpcb.com
 
  • Like
Reactions: fig
JamieJ said:
It’s a PedalPCB klone in a klon enclosure I got from aliexpress.

There’s a link to where I got the enclosure in this build report:

Obnoxious KLONe

I have always been a massive klon fan boy and love both the look and sound of the original. I built one ages ago from FuzzDog but accidentally fried it by putting 18v into. It was the first pedal I built and didn’t know how to find out what was wrong, so it went in the bin (wish I had kept it...
forum.pedalpcb.com forum.pedalpcb.com
Click to expand...
Upon closer inspection, it does indeed say Centaur instead of Centura. I stand corrected. Either way, stellar board. There’s a whole bunch of stuff I wouldn’t know what to do with lol.
 
2668A8C7-5B7E-4FBF-A016-9CAE22895993.jpeg This is my new “grab and go board”. In to out it’s a Closed Circuit Booster Limiter, Son of Ben, Paragon Mini, Arachnid with a delay and reverb assortment, Keeley Eccos, and Spirit Box. So much fun. I just need PedalPCB to have some sort of tap tempo delay… 😉
 

Attachments

  • 9B968E15-CC5E-4B0C-9471-6F062C681B81.jpeg
    9B968E15-CC5E-4B0C-9471-6F062C681B81.jpeg
    387.2 KB · Views: 10
JamieJ said:
Yeah

Yeah there is a bit of overkill on this board. I don’t really need two trems, two delays and three fuzzes but the I have the space so I’m filling it.
Click to expand...
Pffft "overkill" "need" these words are meaningless. I also have a carbon copy after my hydra right now. Your board rules and represents many hours hunched over your bench chasing the good sounds. Respect.
 
Harry Klippton said:
How do you like the eccos? I really wanted to love mine and ultimately i let it go
Click to expand...
Honestly, I think it’s the perfect non-midi delay. There was a slight learning curve to dialing in the secondary functions, but I love the sounds I’m getting out of it. I also have a Source Audio Collider, an Eventide TimeFactor and H9, and a Meris Polymoon, but I’m more than happy to just use the Eccos in most cases.
 
bhcarpenter said:
Honestly, I think it’s the perfect non-midi delay. There was a slight learning curve to dialing in the secondary functions, but I love the sounds I’m getting out of it. I also have a Source Audio Collider, an Eventide TimeFactor and H9, and a Meris Polymoon, but I’m more than happy to just use the Eccos in most cases.
Click to expand...
That's great. I used the looper and sound on sound function way more than the actual delay. I still have the t-shirt too 👕
 
Mentaltossflycoon said:
Pffft "overkill" "need" these words are meaningless. I also have a carbon copy after my hydra right now. Your board rules and represents many hours hunched over your bench chasing the good sounds. Respect.
Click to expand...
Thanks @Mentaltossflycoon - not sure if you are a That Pedal Show fan. If you aren’t and haven’t seen the episode where they use the carbon copy to get chorus tones. It’s pretty awesome and worth a watch. I’ve been meaning to try it but haven’t got round to it yet.

 
You must log in or register to reply here.
Back
Top