Muffin Fuzz - Triangle

[Diatrive]

Hello all,

Building one of these and looking at the PCB I don’t understand the capacitors. The 3hole ones.
The BOM lists all the caps as N. Should I fill them with boxes, and if so how do I put the cap in the pcb?
Side note: are the Pots A100K?

Thanks!

 

[Robert]

The center holes are for electrolytic caps... a few of the variations use them. For non-polarized film caps just use the two outer holes.

I've always used linear for all three pots. Some schematics show log for Volume and Sustain, and linear for Tone.

 

[Diatrive]

Thanks! Great information.