c.est.baastien
New member
Hi
My Cattle Driver build don't operate as expected and I need help to sort it out.
Starting from volume pot at zero, I open the potentiometer slowly. At the very first beginning of the stroke there's no sound at all. Arrived at some point 1 the sound arrives suddenly, not gradually.
Once past this point, I continue the potentiometer stroke to point 2, the volume has not changed since point 1. From this point 2 and until the end of the stroke, the volume remains the same but seems to have increased a little bit compared to the first plateau.
I don't get what's wrong, I swapped IC1 and the circuit still behaves the same.
Power supply 9,46V
Vcc 8,59V
Vref 4,27V
IC1
1 4,28V
2 4,28V
3 2,14V
4 0V
5 8,57V
6 4,28V
7 4,28V
8 2,14V
IC2
1 1,37V
2 4,27V
3 2,13V
4 0V
5 3,65V
6 8,57V
7 4,27V
8 1,28V
My Cattle Driver build don't operate as expected and I need help to sort it out.
Starting from volume pot at zero, I open the potentiometer slowly. At the very first beginning of the stroke there's no sound at all. Arrived at some point 1 the sound arrives suddenly, not gradually.
Once past this point, I continue the potentiometer stroke to point 2, the volume has not changed since point 1. From this point 2 and until the end of the stroke, the volume remains the same but seems to have increased a little bit compared to the first plateau.
I don't get what's wrong, I swapped IC1 and the circuit still behaves the same.
Power supply 9,46V
Vcc 8,59V
Vref 4,27V
IC1
1 4,28V
2 4,28V
3 2,14V
4 0V
5 8,57V
6 4,28V
7 4,28V
8 2,14V
IC2
1 1,37V
2 4,27V
3 2,13V
4 0V
5 3,65V
6 8,57V
7 4,27V
8 1,28V
Last edited: