SOLVED Pangea Vibe, RM Voodoo Vibe Clone

[s.loth]

Hi everybody,

I've been building a Univibe clone, by Kastle/ Musikding, called Pangea Vibe.

It turns on, bypass works, power LED works, relay is switching, but no effect is being applied. I'm thinking that it's power related, as in, power doesnt get to the audio and LFO circuit, since the yellow LED 3 and the LFO LEDs don't light up. When I turn the volume up to the max, I hear a gentle noise.
I have already double checked polarity on all polarity sensitive parts. So I'm at my end. I hope somebody can help me out here.

efaidnbmnnnibpcajpcglclefindmkaj/https://musikding.de/docs/kastle/Pangea2015.pdf

 

[Bret608]

It looks like only one of your jacks has a ground wire to the board, if I'm seeing correctly. You would need both if you're testing outside the box. Hope you can get it working! I built this year's ago and it's great.

 

[s.loth]

Both jacks have a ground connection. really excited for this one

 

[jwin615]

LM324 fully seated? Looks to not be. There's a buffer for the power so that could cause issues.
Since this is t a ppcb project, I'll post schem screenshots here
There's a thcustom sub forum over at madbean. May be helpful to post there too

I would definitely make a mistake following a REFDES with this font choice

 

[s.loth]

Hey, ok, looks like the issue was, that the "coding" for pus and minus (sqaure/round) of the power LED was the opposite of alle the other LEDs. So I think that solved it.