Paragon Buffer shoe-in

[KevTom23]

Hi all.
In an attempt to rid my paragon build of its higher-gain squeal (both sides on at near full beans), I’m about to build a klon-style buffer circuit on vero board to fit inside the enclosure. There’s no battery, so plenty of room.
Would I be right in thinking that the input in the image connects to input jack tip and the output to the pcb’s input (where the wire from input tip would usually go)?

 

[zgrav]

if you want to keep true bypass on the pedal instead of having an always-on buffered input, the input to the VERO would come from the footswitch "IN' and the output would go into the PCB "IN"

 

[KevTom23]

Thank you. I'll be going for the "always on" option so just needed confirmation that I had the wiring worked out correctly