Looking for help troubleshooting my Paragon Mini build. I've looked for cold joints and reflowed a bunch of stuff, but right now neither side is working. I had the 1st (right / blue led) functioning for a minute but then it's gone quiet. Red doesn't work at all. LEDs work fine. Bypass works fine. IC Voltages are approximates (and weirdly on the bottom IC pins 1 and 2 start high (like 3.5v) and then slowly drop to what I've shown below).
Top IC voltages:
1: 4.5
2: 4.5
3: 4.5
4: 0
5: 4.5
6: 4.5
7: 4.5
8: 8.5v (that's what this power supply puts out)
Bottom IC voltages:
1: 1.6
2: 2.6
3: 4.5
4: 0
5: 4.5
6: 45.
7: 4.5
8: 8.5v
Thank you!
Top IC voltages:
1: 4.5
2: 4.5
3: 4.5
4: 0
5: 4.5
6: 4.5
7: 4.5
8: 8.5v (that's what this power supply puts out)
Bottom IC voltages:
1: 1.6
2: 2.6
3: 4.5
4: 0
5: 4.5
6: 45.
7: 4.5
8: 8.5v
Thank you!