- Build Rating
Went together pretty smoothly, nothing to debug! I think this is going to replace my RAT with clipping switch. My board is small so the more of this functionality I can get into single pedals, the better! I also don't leave the house, so no worries about harder to activate footswitches.
Matched the diodes, capacitors, and resistors in the octave section. I used 1N5817s for the octave section.
Socketed the clipping diodes in case I wanted to turbo rat one side of the clipping diodes, but the asymmetirc side with the LED gets me far enough there already I think.
Used an OP07 but also populated the compensator cap in case I want to put a lm308 in there (I don't this time, I now know I cant tell a difference)
I also socketed 2 of the transistors (called for PF5102) and used 5457.
Matched the diodes, capacitors, and resistors in the octave section. I used 1N5817s for the octave section.
Socketed the clipping diodes in case I wanted to turbo rat one side of the clipping diodes, but the asymmetirc side with the LED gets me far enough there already I think.
Used an OP07 but also populated the compensator cap in case I want to put a lm308 in there (I don't this time, I now know I cant tell a difference)
I also socketed 2 of the transistors (called for PF5102) and used 5457.
