SOLVED Pedal pop - 4v voltage in the output jack

[RajahMoore]

So I built the Caesar Chorus pedal and had a pedal pop, did some looking around and noticed that I had a 4.7V voltage in the output jack. I’m wondering maybe I have a bad capacitor somewhere? Any idea as to which one I should be looking to replace or can anyone point me to a schematic that could help me figure this out?

 

[Barry]

Can you use your DMM to trace back where the voltage leaks in, I guess without a schematic it would be tough unless you can follow the traces

 

[RajahMoore]

Yeah, I’ve read that Julia is based around CE 2 so I guess I can use that schematic as a guide maybe?

 

[Chuck D. Bones]

I'd like to help. I'll check back once a schematic is available.

 

[RajahMoore]

I'd like to help. I'll check back once a schematic is available.

Thanks! Hoping the schematic is made available soon.

 

[RajahMoore]

Using the Boss CE2 schematic and DMM, I was able to figure out the voltage leak was coming from one of the 1uF caps, turns out the batch of capacitors I had was no good. Thank you for the initial advice @Barry!