Chuck D. Bones
Circuit Wizard
What a great tool! Highly recommended.
The base is poplar, cut from an S4S 1 x 7 from Lowes. Lightly sanded and given a single coat of Teak oil. It's almost a shame that the breadboard covers 90% of the wood. You have to turn it over to see the pretty side.
The board is mounted with five #6 x 1 CRES sheet metal screws. CRES washers on the top, 1/4" nylon spacers underneath. I had to drill the holes in the board a little larger to fit the #6 screws.
The base is poplar, cut from an S4S 1 x 7 from Lowes. Lightly sanded and given a single coat of Teak oil. It's almost a shame that the breadboard covers 90% of the wood. You have to turn it over to see the pretty side.
The board is mounted with five #6 x 1 CRES sheet metal screws. CRES washers on the top, 1/4" nylon spacers underneath. I had to drill the holes in the board a little larger to fit the #6 screws.