PedalPCB Electrovibe Mini

There now.....hmm, I might actually like it better plain :ROFLMAO:

WF0hfim.jpg
 
Spiffin' build Tim!
Where d you source mentioned 7532 LDRs?
Component placement and Tanatlum straightness is a meditation in OCDness. Noice.
 
  • Like
Reactions: fig
I'll have to try them out. I have GL-5528, 5537-1, 5537-2, 5549.
Btw - quite challenging pedal to set up. So many variables - bulb, ldr, two trimmers.
It wasn't a difficult build. There were a few considerations such as the capacitor package height and the connection headers, but it seems a very forgiving circuit otherwise (or I'm just lucky). It functioned really well on the first test, without any adjustments to trimmers, etc. I would wager as long as the LDRs are within range (dark/light resistance) it would still sound just fine.
 
Spiffin' build Tim!
Where d you source mentioned 7532 LDRs?
Component placement and Tanatlum straightness is a meditation in OCDness. Noice.
Thank you sir!
I've bought them from a few sources, but these are solid.
I have some of these lamps from SB as well, but I used an older one without the base. I fashioned my own using an LED bezel insert.
 
Back
Top