PedalPCB Nobleman Overdrive/Nobels ODR-1 1590b

[OD is Glorious]

shouldn't a 2" wide board fit inside a 1590b?
I just fit a transcendance boost board in a 1590b2, and that board is 1.95" wide.. the nobleman is only .05" wider..
there's still a lot of room on the sides
probably ~.20"
pic related to give you a scale comparison
edit- if you are concerned about the height, a 1590b2 is almost as tall as a 125b, and a 1590bs is a little taller..

I think so. I put a Timmy in a 1590b and the board is too big by a lot. 2.2 × 2.25 × 0.5 in - I sanded the width

 

[like Yeah!]

I feel that PedalPCB's prices are more than fair; and they are a steal when you factor in the regular sales.

i like that the boards look like you should put only nice parts on them...