OD is Glorious
Well-known member
I put this together this afternoon. Lovely reverb pedal with more options than the Sproing and less options than the Deflector or the Gravitation. Might be your sweet spot. For me the Sproing was not enough and the Deflector was too much. I loved the Gravitation and this one is in second. You can get great slap back delay from this pedal.
I used a Tayda gray powder coated enclosure with the PedalPCB top jack plate, I went with 15mm black knobs to match the black graphics. The LED is a 5mm blue diffused and the jacks are switchcraft. If you go with this pedal you will need to pay for the 15 dollar BTDR module. I saw there was enough space for my rotund 100u caps so I threw them in there.
Edit: I almost forgot... I deviated from the build based on a several comments posted here. R4 calls for a 10k resistor and I used an 18k. I cannot tell you what it sounds like with the 10k but I like it with the 18.
I enjoyed building this pedal and then I put it on the PedalPCB platform and it worked straight away. I then boxed it and off we go!
I used a Tayda gray powder coated enclosure with the PedalPCB top jack plate, I went with 15mm black knobs to match the black graphics. The LED is a 5mm blue diffused and the jacks are switchcraft. If you go with this pedal you will need to pay for the 15 dollar BTDR module. I saw there was enough space for my rotund 100u caps so I threw them in there.
Edit: I almost forgot... I deviated from the build based on a several comments posted here. R4 calls for a 10k resistor and I used an 18k. I cannot tell you what it sounds like with the 10k but I like it with the 18.
I enjoyed building this pedal and then I put it on the PedalPCB platform and it worked straight away. I then boxed it and off we go!
